1966 A&BC Batman Black Bat #13

Centering estimate: left border appears slightly narrower than right (approx 60/40 L-R), top border slightly larger than bottom (approx 55/45 T-B) — centering is acceptable for EX range. Corners show light-to-moderate rounding visible on at least two corners (upper-left and lower-left appear most worn), consistent with EX to VG-EX territory. Edges appear reasonably clean with no severe nicks visible at this resolution. Surface shows some gloss loss typical of the era, with no obvious creases visible in this photo, though the image angle and resolution make it impossible to rule out light surface creases entirely. The card's condition appears consistent with PSA 5 EX as the most likely grade, with the range reflecting uncertainty about corner wear severity and any hidden surface issues on the back.

Centering estimate: left border approximately 4mm, right border approximately 6mm giving roughly 60/40 L/R; top border approximately 5mm, bottom approximately 4mm giving roughly 55/45 T/B — centering is off but not severely so. Corners are difficult to assess precisely through sleeve glare but appear to show light rounding on at least two corners, consistent with EX range. Surface shows some toning/aging typical of this British issue but no creases are visible from this single front photo. Edges appear reasonably clean with no major nicks evident, though the sleeve and angle hide fine detail; the range is widened accordingly as corner and edge conditions cannot be confirmed with confidence.

Centering estimate: left border appears narrower than right (approximately 70/30 left-right bias), top and bottom borders appear more even at roughly 55/45 — centering is notably off horizontally, consistent with EX-5 to VG-EX-4 territory. Corners show some rounding, most visible on the lower-right, suggesting moderate wear consistent with EX or VG-EX range. Surface shows no obvious creases visible from this angle, and the artwork colors remain bright with reasonable gloss retention. Edges appear slightly rough but that is normal production variance for A&BC issues and should not be over-penalized. The COMC watermark obscures the center surface, preventing confident assessment of print defects or staining; back is unseen.