1966 A&BC Batman Black Bat #18

Centering: left border appears approximately 4mm, right border approximately 3mm giving roughly 57/43 L/R; top border approximately 4mm, bottom border approximately 5mm giving roughly 45/55 T/B — centering is acceptable for a mid-high grade. Corners appear reasonably sharp with no obvious rounding visible from this distance, though the photo resolution prevents a definitive corner assessment. Surface shows good color saturation and apparent gloss retention with no visible creases; minor printing imperfections typical of A&BC 1966 stock are expected and not penalized. Edges appear clean with no major chipping; the rough-cut character normal to A&BC cards is present and not penalized, but a closer corner inspection would be needed to confidently push above a 7.

Centering estimate: left border slightly wider than right, approximately 60/40 L/R; top border notably narrower than bottom, approximately 65/35 T/B — centering is imperfect but within EX-range tolerance. Corners show some rounding/softening visible at all four corners, most notably the bottom-left, consistent with EX to VG-EX wear. Surface appears reasonably clean with no obvious creases visible from this photo, gloss appears partially retained though some flatness is evident. Edges appear slightly rough/uneven as is normal for A&BC cuts of this era; the card appears to be held in a recessed holder which slightly obscures edge and corner detail, preventing a tighter range — back cannot be assessed.

Centering estimate: left border appears narrower than right (~60/40 left-right skew disadvantaging left), top border slightly wider than bottom (~55/45 top-bottom) — not severe but noticeable. Corners show visible rounding on at least the upper-left and lower-left corners visible in frame; upper-right appears slightly better but still soft. Surface shows some light toning and minor soiling consistent with age on a 1966 British card; gloss appears partially intact but reduced. No obvious creases are visible from this photo though the sleeve glare obscures portions of the surface, particularly along the right edge, making a definitive surface call impossible — a hidden crease cannot be ruled out. Edges appear reasonably clean for the issue. Overall condition consistent with VG-EX (4), with the range reflecting uncertainty about hidden surface issues under the sleeve.