1966 A&BC Batman Red Bat #13A — Raw

Centering estimate: left border appears noticeably wider than right (roughly 70/30 L-R), top border slightly wider than bottom (approximately 60/40 T-B), so horizontal centering is a meaningful concern. All four corners show visible rounding consistent with handling wear — no sharp points remain, placing this firmly in the VG range at best. The surface shows general gloss loss and what appears to be toning/aging across the card face, with some creasing or stress lines visible particularly in the lower portion of the card; the red bat logo area looks worn. Edges appear reasonably intact with no obvious tears but do show typical A&BC rough-cut texture which is not penalized. Overall condition points to VG (3) as the most likely grade, with VG-EX (4) possible if the apparent surface crease resolves as a printing artifact, and GOOD (2) possible if additional wear or deeper creasing is revealed under closer inspection.

Centering estimate: left border appears noticeably wider than right (~65/35 L/R), top border slightly wider than bottom (~55/45 T/B), so horizontal off-centering is the primary concern. Corners show visible rounding on at least two corners visible in this view, consistent with VG-range wear. Surface shows moderate toning/aging with some loss of gloss, and there appear to be light handling marks or creases near the lower portion of the card, though the image angle makes it difficult to confirm a definitive crease. Edges appear rough but consistent with normal A&BC cutting standards for the era. The combination of corner rounding, apparent surface wear, gloss loss, and possible light crease points to a PSA 3 VG as most likely, with the range spanning 2-4 depending on crease severity which cannot be fully confirmed from this single front photo.