1966 OPC Batman Bat Laffs #45 Batman and Robin

Centering estimate: left border appears noticeably wider than right (~65/35 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is off but not catastrophically so. All four corners show visible rounding and wear, consistent with a VG or lower grade; no corners appear sharp. Surface shows significant toning/soiling, particularly a large whitish scuff or stain in the lower-center area of the image, and overall gloss appears heavily diminished across the card face. Edges appear rough but that is normal for OPC vintage cuts; the combination of rounded corners, heavy surface staining/scuff, and gloss loss points squarely to VG (3), with a range of 2 if the back shows creases or additional damage and 4 only if the surface stain proves minor under direct inspection.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border narrower than bottom (~45/55 T/B) — centering is acceptable but not tight. Corners show visible rounding on all four, most pronounced at the lower corners, consistent with a VG-range card. Surface shows notable toning/aging across the white border areas and general gloss loss, with what appears to be light soiling or a possible light crease in the lower center obscured partly by the COMC watermark. Edges appear intact without major chips but show wear consistent with handling; the COMC watermark prevents full assessment of the lower surface, widening the range — collector should inspect back and lower surface carefully for creases before submitting.

Centering estimate: left border appears noticeably wider than right (~65-70% left bias), top border slightly wider than bottom, roughly 65/35 L/R and 60/40 T/B — centering is off but not catastrophically so. The card shows visible overall toning and wear consistent with a well-used vintage OPC card; the white borders appear dingy/yellowed with gloss loss evident across the surface. Corners appear rounded rather than sharp — at least two corners show visible blunting visible even at this resolution, suggesting VG to VG-EX territory at best. No obvious hard crease is detectable from this scan, but surface wear and corner rounding place this firmly in the 3–4 range; the photo resolution prevents confident assessment of edge nicks or finer surface issues, so the range is widened accordingly.