1966 OPC Batman Black Bat #11 Poison Pellet

Centering estimate: left border appears narrower than right (roughly 60/40 L-R favoring right), top border slightly wider than bottom (approximately 55/45 T-B) — centering is acceptable for a grade in the EX range. Corners: all four corners show light-to-moderate rounding consistent with handling wear; no sharp points visible, which pushes this toward EX (5) rather than EX-MT (6). Edges appear reasonably clean with typical rough-cut texture normal for this OPC/Topps 1966 issue — no severe chipping noted. Surface shows decent gloss retention with no obvious creases or staining visible, though the photo resolution limits fine surface inspection; print quality looks solid with no prominent snow or defects noted. Overall condition consistent with a PSA 5 EX, with 4 possible if corner rounding is more pronounced on reverse inspection.

Centering estimate: left border appears moderately wider than right (~60/40 L/R), top border slightly wider than bottom (~55/45 T/B) — centering acceptable for a PSA 6-7 range. Corners: upper-left shows slight blunting visible at this resolution; upper-right and lower-left appear reasonably sharp; lower-right is partially obscured by the bat logo overlay but looks soft. Surface gloss appears intact with no obvious creases or staining; the artwork reproduction shows some typical vintage print texture but no distracting print snow or heavy toning on the white border. Back is not visible so no opinion on OPC vs Topps US printing; edges appear clean with no miscut indicators. Overall condition consistent with EX-MT to NM range pending corner examination under better magnification.

Centering estimate: left border appears noticeably wider than right (roughly 65-70% left / 30-35% right), and top border slightly wider than bottom (approximately 55/45 top-bottom) — left-right centering is the primary concern and likely grades around 85/15 or worse on that axis. Corners: the visible corners show some rounding and softening, consistent with light to moderate wear — no razor sharpness evident, placing this in the EX to VG-EX range on corners alone. Surface appears to retain decent gloss with no obvious creases visible from this photo, and color saturation looks solid with typical OPC print characteristics. Back is not visible, which limits certainty; a crease or heavier reverse wear could push this toward a 4, while clean reverse and better corner inspection could support the higher end.