1966 OPC Batman Black Bat #54 Whirlpool

Centering estimate: left border ~10%, right border ~15%, top border ~12%, bottom border ~18% — roughly 60/40 L/R and 65/35 T/B, acceptable for vintage but slightly heavy on the bottom. Corners show light rounding on at least two visible corners (upper-left and lower-left appear softer than sharp), suggesting moderate wear consistent with EX range. Surface appears reasonably clean with decent color saturation and no obvious creases visible from this angle; gloss appears slightly reduced but not heavily worn. Edges look somewhat rough but this is typical of OPC coarser cuts and should not be over-penalized per vintage standards; no adjacent card printing is visible so no miscut is indicated.

Centering estimate: left border appears notably wider than right (approximately 65-70% left / 30-35% right), and top border appears slightly wider than bottom (roughly 55/45 top/bottom) — left-right imbalance is the primary centering concern, approaching or at EX-MT limits. All four corners show light-to-moderate rounding, consistent with handling wear; no corner is sharp enough for NM territory, but none appears severely blunted either, suggesting EX to EX-MT range. Surface gloss appears present but somewhat muted under ambient lighting; no obvious creases, staining, or paper breaks visible from this photo. Edges appear reasonably clean with typical vintage rough-cut texture normal for OPC/Topps 1966 — no miscut adjacent printing detected. Back not visible, which limits confidence; a back-side crease or stain could push this lower.

Centering: left border appears slightly wider than right (~60/40 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is acceptable, no OC concern. Corners: the upper-left and lower-left corners show modest rounding visible even at this resolution; upper-right appears reasonably sharp but lower-right is harder to assess. Surface: some gloss loss is apparent, consistent with light handling wear; no creases are detectable from this photo, though the back cannot be confirmed. Edges appear reasonably clean with no gross nicks visible, but the OPC rough-cut characteristics are expected and not penalized — overall condition points to an EX range (PSA 5), with the corner rounding and gloss loss preventing a push into EX-MT territory.