1966 OPC Batman Blue Bat #30B Jostled by the Joker

Centering estimate: left border ~3mm, right border ~5mm, top border ~4mm, bottom border ~3mm, yielding approximately 62/38 L/R and 57/43 T/B - centering is slightly off but within EX-MT range and not severely OC. Corners appear to show light rounding, particularly visible on the lower-left and upper-right corners, consistent with EX to EX-MT level wear. Edges appear reasonably clean with the slightly rough cut texture normal for OPC issues and not penalized. Surface shows what appears to be a light crease or surface disturbance in the upper-left quadrant area near the machinery, and there is some gloss loss visible across the card face; no major staining or writing detected. The seller's 'EXMT' claim is plausible at the upper end but the apparent surface wear and possible light crease keep the floor at VG-EX (4); back is unseen so a hidden crease or staining could push lower.

Centering estimate: left border appears notably wider than right (roughly 70/30 left-to-right), top border slightly wider than bottom (approximately 60/40 top-to-bottom) — off-center but not catastrophically so. Corners show visible rounding on at least two corners visible in frame (upper-left and lower-left appear soft), consistent with a VG-EX to EX range. Surface shows some general toning and light gloss loss typical of 1966 OPC stock; no obvious hard creases are visible from this image, though the scan quality prevents ruling one out entirely. Edges appear rough but this is normal for OPC cuts of this era and should not be penalized heavily; overall the card presents in the VG-EX (4) neighborhood with some chance of EX (5) if the back and corners are cleaner than they appear here.

Centering estimate: left border appears notably narrower than right (~60-65% of right border width), top border slightly narrower than bottom – approximate L/R ratio ~65/35, T/B ~55/45, so centering is off but not extreme. All four corners show visible rounding and wear, with the bottom-left corner appearing most blunted; no corners qualify as sharp. Surface shows moderate gloss loss consistent with handling; no creases are clearly visible in this image though the stock appears lightly toned. Edges look rough-cut which is normal for OPC issues and should not be penalized. The blue bat logo area at bottom shows some wear/color rubbing. Back is not visible so any hidden creases or staining cannot be assessed, widening the range accordingly.