1966 OPC Batman Blue Bat #36B A Pressing Position

Centering estimate: left border appears notably narrower than right (roughly 70/30 L-R favoring right), top border slightly wider than bottom (approximately 55/45 T-B) — horizontal centering is the primary concern but not extreme. All four corners show visible rounding and soft wear consistent with handling; no corners appear sharp. Surface shows moderate gloss loss and some light soiling or toning across the card face, consistent with age and handling. A light crease or surface wrinkle appears possible in the lower left quadrant of the image area but is difficult to confirm definitively at this resolution — if present, that pushes toward a 2-3; if surface wear only with no crease, a 4 is reachable. Collector note: OPC vs. Topps origin cannot be confirmed from the front alone; back inspection required.

Centering estimate: left border ~6mm, right border ~3mm, top border ~4mm, bottom border ~3mm — yielding approximately 65/35 L/R and 57/43 T/B; the left-to-right imbalance is notable but the more pressing concern is overall surface wear. Corners show visible rounding on all four, with the lower-left appearing the most worn — consistent with a VG to VG-EX range. Surface shows scattered toning, softened gloss, and what appears to be light handling wear or a possible light crease in the upper-left quadrant of the image area, though the image resolution makes definitive crease confirmation difficult. Edges appear reasonably intact for the grade with no obvious notching, and the rough-cut character typical of OPC issues is present and not penalized; the combination of rounded corners, gloss loss, and probable surface wear points firmly to a PSA 3, with a slim possibility of 4 if the suspected crease is only a print artifact.

Centering estimate: left border appears narrower than right (roughly 70/30 L-R), top border slightly tighter than bottom (approximately 60/40 T-B) — centering is off but not catastrophically so. All four corners show visible rounding, with the top-left and bottom-left appearing most worn; no corner is sharp. Surface gloss appears reduced with some light wear visible across the face, consistent with handling. No creases are definitively confirmed from this scan, but image softness prevents ruling them out; if crease-free, a PSA 4 VG-EX is the most likely outcome, while any surface crease would push toward a 3 VG. Edges show typical rough-cut texture normal for OPC vintage stock and should not be penalized heavily.