1966 OPC Batman Blue Bat #40B Batman Bails Out! — Raw

Asking range
Confirmed sales
Live listings
| Price | Type | Est. grade (ours) | Est. ROI after grading | Listing (opens eBay) | |
|---|---|---|---|---|---|
![]() | $7.15 | Buy It Now | 3 (2–4) | — | 1966 O-Pee-Chee Batman B Series (Blue Bat Logo) Batman Bails Out #40B 09k3 on eBay |
![]() | $7.15 | Buy It Now | 3 (2–4) | — | 1966 O-Pee-Chee Batman B Series (Blue Bat Logo) Batman Bails Out #40B 09k3 on eBay |
Index grading notes

Centering: left border appears notably narrower than right (estimated ~60/40 L/R favoring right), top border slightly wider than bottom (~55/45 T/B) — centering is off but not catastrophically so. Corners show visible rounding on all four, most pronounced at lower-left and upper-left, consistent with a VG card. Surface shows noticeable creasing — a diagonal crease runs across the upper-left quadrant and is plainly visible, which is a significant grade-suppressing defect pushing this toward the VG-GOOD range. Gloss is substantially reduced and there is general toning/wear consistent with a played 1966 card; edges appear somewhat rough but that is normal for OPC cuts of this era. The COMC watermark partially obscures the lower center, limiting full surface assessment, but enough is visible to call this a VG (3) card, with a possible floor of 2 if additional creases or staining are present on the back.

Centering estimate: left border appears roughly 3-4mm, right border 5-6mm, giving approximately 60/40 L/R; top border roughly 4mm, bottom 5mm, approximately 55/45 T/B — centering itself is not catastrophic but is secondary to condition issues. All four corners show visible rounding and softening, consistent with a VG to VG-EX range. The surface shows noticeable creasing — a diagonal crease is visible running across the upper-left quadrant of the card, which is a grade-limiting defect pushing toward VG (3) or below. Gloss appears substantially diminished across the face. The COMC watermark obscures fine surface detail in the center, preventing full assessment of print defects or additional scratching; the back is not visible. Overall the rounding corners, evident crease, and gloss loss point to a PSA 3 (VG) most likely, with the range spanning 2–4 depending on crease severity and any reverse-side issues.