1966 OPC Batman Red Bat #10A Cycling Crusader — Raw

Centering estimate: left border appears narrower than right (approximately 65/35 L-R favoring right), top border slightly wider than bottom (approximately 55/45 T-B) — centering is off but not severely so. Corners show visible rounding on all four, most pronounced at the lower-left and upper-right, consistent with a grade-5 or borderline 4-5 card. Edges appear reasonably clean with no gross chipping evident, though the coarser OPC cut makes edge assessment slightly harder. Surface shows some gloss loss and possible light wear consistent with age; no creases are visible from this scan but the sleeve glare obscures the lower-center surface area, so a hidden crease cannot be ruled out. Overall condition suggests EX range (5), potentially slipping to VG-EX (4) if corner rounding or surface wear is more pronounced under direct inspection.

Centering estimate: left border appears narrower than right (~60/40 L/R), top border slightly tighter than bottom (~55/45 T/B) — centering is off but not severely miscut. Corners show visible rounding on all four, most pronounced at the top-left and bottom-left, consistent with a VG to VG-EX range. Surface shows notable wear including what appears to be scattered scuffing, light creasing or stress lines across the image area (particularly visible in the lower-left quadrant), and significant gloss loss throughout. Edges appear rough but within expected OPC/Topps 1966 production norms. The combination of rounded corners, visible surface wear/creasing, and gloss loss places this card solidly in the VG (3) range, with VG-EX (4) possible only if the apparent creases are surface scuffs rather than true paper folds; Good (2) is the floor if creasing is confirmed on inspection.

Centering estimate: left border appears narrower than right (~60/40 L/R favoring right), top border slightly wider than bottom (~55/45 T/B) — centering is off but not severely miscut. Corners show visible rounding on at least two corners (bottom-left and top-left most visible), consistent with VG to VG-EX wear. Surface shows notable scuffing, scratching and crease lines visible across the face — at least one diagonal surface crease is apparent in the upper-left quadrant, and general gloss loss is evident throughout. Edges appear rough but within normal OPC/Topps vintage cut tolerances. The watermark partially obscures surface assessment; the combination of rounded corners, visible crease(s), and gloss loss points firmly to a PSA 3 (VG) with a possible stretch to 4 (VG-EX) if the crease is shallower than it appears, or a drop to 2 if additional creases are hidden by the watermark.