1966 Topps Batman Black Bat #3 The Bat Signal

Centering estimate: left border ~8mm, right border ~5mm, top border ~6mm, bottom border ~5mm — approximately 60/40 L/R and 55/45 T/B, which is workable but not tight. Corners: upper-left and lower-left corners appear the sharpest from this angle; the upper-right corner shows a slight softening, and the lower-right is partially obscured by the card's curve — no hard creases visible. Surface presents reasonably well with no obvious print snow or staining noted in the image; gloss appears intact though lighting is not ideal for detecting subtle surface wear. Edges look clean with no evident nicks; rough-cut texture on the right edge is consistent with normal 1966 Topps production and not penalized. Back is unseen, so hidden creases or staining cannot be ruled out — range is widened accordingly.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is acceptable and not a primary grade limiter. Corners: at this resolution all four corners show some softening/rounding, consistent with light-to-moderate wear; no sharp razor corners visible, suggesting EX to VG-EX range. Edges appear reasonably clean with the typical rough-cut texture normal for this 1966 Topps issue — no severe chipping noted. Surface shows apparent gloss retention with no obvious creases visible, but the image angle and foam backing prevent full assessment of the lower portion of the card and back; minor print grain/snow is typical for this set and has not been penalized. No miscut detected. Range of 4–6 reflects uncertainty around corner rounding and any hidden surface issues not fully resolvable from this single front photo.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border noticeably thinner than bottom (~60/40 T/B) — centering is acceptable for EX-EX-MT range. Corners: at this resolution the corners appear to have some rounding or softness, particularly visible on the upper-left and lower-left, consistent with EX to VG-EX handling wear. Surface: gloss appears reasonably intact with no obvious creases visible in the image, though print texture and minor snow typical of this issue are present. Edges appear intact without major chipping; the rough-cut texture on the left edge is normal for 1966 Topps Batman and not penalized — back condition and corner closeups are not available, so the range is widened accordingly.

Centering estimate: left border appears notably narrower than right (~70/30 L/R), top border slightly narrower than bottom (~55/45 T/B) — left-to-right centering is a concern. Corners show visible rounding on at least two corners visible in the scan (lower-left and upper-left), consistent with a VG-range card. Surface shows some gloss loss and what appears to be light soiling or toning across the face; the scan resolution limits confident assessment of crease presence but the image appears to show some surface disturbance near the lower portion. Edges appear rough but within normal vintage cut parameters for this set; no miscut detected. The combination of rounded corners, centering issues, and apparent surface wear points to VG (3), with VG-EX (4) possible if corners are slightly better than they appear and no crease is confirmed on the back.