1966 Topps Batman Black Bat #30 Fighting Back — Raw

Centering estimate: left border appears narrower than right (roughly 60/40 L-R favoring right), top border slightly wider than bottom (roughly 55/45 T-B) — centering is off but not severely so. White borders show visible toning/aging consistent with 1966 vintage stock, which is expected and not heavily penalized. Corners appear rounded at all four tips — most visibly at top-left and bottom-right — consistent with VG to VG-EX range; no sharp corners are evident from this photo. Surface shows some gloss loss and the overall card face has the softened look of a well-handled card; no obvious hard creases are visible from this angle, though a subtle surface crease cannot be ruled out without a back photo. Edges appear reasonably clean with no significant chips or tears; rough cut texture is normal for this issue and not penalized.

Centering estimate: left border appears roughly 10-12% wider than right border, top border slightly wider than bottom — approximately 55/45 L/R and 55/45 T/B, which is acceptable for this grade range. Corners: upper-left and lower-left corners appear slightly rounded under inspection; upper-right and lower-right look marginally better but not sharp enough for NM territory. Edges appear intact with no obvious nicks visible from this angle; the rough-cut texture on the bottom edge is consistent with normal 1966 Topps production and is not penalized. Surface shows mild gloss loss and some light toning on the cream/white border areas consistent with age, no visible creases, and print appears clean with good color saturation. Back is not visible, and corner closeups are unavailable, so the range is widened slightly; a crease or more significant corner wear on the reverse could push this toward a 4.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is reasonably tight and does not cap the grade. Corners appear to have light wear on at least two corners (top-right and bottom-right show slight softening), consistent with EX-MT to NM range. Edges look fairly clean with no obvious nicks visible at this resolution; rough cut texture is normal for the Black Bat series and not penalized. Surface shows good color saturation and gloss appears intact with no obvious creases, staining, or print defects beyond typical vintage print texture; however, corner detail is not fully resolvable at this scan resolution, preventing confirmation of NM-grade sharpness.

Centering estimate: left border appears narrower than right (approximately 60/40 L-R), top border slightly wider than bottom (approximately 55/45 T-B) — centering is acceptable but not tight-mint. Corners appear reasonably intact with only minor blunting visible on the lower-right corner; no severe rounding detected. Edges show a slightly rough cut consistent with vintage 1966 Topps production norms — not penalized. Surface gloss appears moderate with no obvious creases, staining, or print defects visible; some light toning on white borders is possible but not clearly evident at this resolution. Corner detail and back condition cannot be confirmed from this single front photo, which widens the range.

Centering estimate: left border appears roughly 10-12% wider than right border, top border slightly wider than bottom — approximately 55/45 left-to-right and 58/42 top-to-bottom, which is acceptable for a PSA 6-7 range. Corners appear to show light wear with minor blunting visible at two or three corners, consistent with EX-MT to NM condition; no corners appear sharply creased or heavily rounded. Surface gloss appears reasonably intact with no obvious creases, staining, or print snow severe enough to downgrade significantly, though the scan resolution limits a definitive call on fine surface scuffing. Edges show the typical rough-cut texture normal for 1966 Topps Batman and are not penalized; back is not visible so hidden flaws (creases, stains, writing) cannot be ruled out, widening the range.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border appears slightly wider than bottom (~55/45 T/B) — centering is reasonably tight and not a primary concern. The seller title says 'READ' which typically signals disclosed flaws, and the image caption confirms 'corner wear, corner wear' on at least two corners — corner rounding/wear is visible particularly on the lower corners, consistent with EX to VG-EX range. Surface gloss appears mostly intact with no obvious creases visible in the image, and the card face shows good color saturation typical of this set. Without a back view or corner macro shots, a crease cannot be ruled out; the disclosed 'corner wear' language and visible softening push the ceiling down from NM territory, landing this most likely in the EX (5) range with VG-EX (4) possible if corner wear is more pronounced than the photo reveals.

Centering estimate: left border appears noticeably wider than right (roughly 70/30 L-R), top and bottom borders appear more balanced at approximately 55/45 T-B — left-to-right shift is the primary centering concern. Corners: all four corners show visible rounding and softening consistent with a grade-4 or low-5 card; no sharp points are apparent even at this resolution. Edges: cut appears reasonably clean with no obvious miscut or adjacent printing visible; rough edge texture is normal for this issue and is not penalized. Surface: gloss appears partially intact with some dulling, no creases are positively identifiable in this photo though the lower-left area has a subtle shadow that could indicate a light surface crease — if a crease is confirmed on inspection the grade floors at 3. The angled single photo limits corner and edge evaluation precision, hence the widened range.

Centering estimate: left border appears slightly wider than right (roughly 55/45 L/R), top border slightly wider than bottom (roughly 55/45 T/B) — centering is acceptable for EX range. Corners show light rounding consistent with handling wear; no sharp points visible but no severe rounding either, placing this in the EX to VG-EX range. Edges appear clean with the rough cut texture normal for this 1966 Topps issue — no over-penalization applied. Surface gloss appears present but reduced, with no obvious creases visible in the image; the seller's 'EX' self-description aligns with what is seen, though a back inspection and corner macro shots would be needed to confirm. No staining, writing, or print snow visible at this resolution.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border noticeably wider than bottom (~60/40 T/B) — centering is off but within EX-MT range. Corners appear reasonably sharp with minimal rounding visible on the visible corners; no severe wear evident, consistent with EX to EX-MT range. Surface gloss appears decent with no obvious creases visible in this image, though the seller's title suggests 'hg6' (high-grade 6) which aligns with the visual evidence. Edges appear slightly rough but that is typical for 1966 Topps Batman rough-cut stock and should not be penalized; back not visible so staining or creasing cannot be ruled out, widening the range accordingly.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border appears slightly wider than bottom (~55/45 T/B) — centering is quite reasonable and not a significant grade penalty. Corners appear lightly worn with minor rounding visible on at least the upper-right corner; lower corners are harder to assess definitively at this resolution but appear to have slight wear as well. Edges look reasonably clean with the rough-cut texture normal for this 1966 Topps issue and not penalized. Surface shows good gloss retention with vibrant color and no visible creases or staining, though minor print snow or minor gloss loss cannot be ruled out from this single image. Back condition and corner closeups are unavailable, so the range is widened accordingly; a crease hidden on the back or more pronounced corner rounding could push toward the lower end.

Card is housed in a screw-down acrylic holder (not a PSA/BGS slab), which obscures corners and edges - the most critical grading zones. Centering estimate from visible borders: left border appears slightly narrower than right (~55/45 L/R), top border appears marginally thinner than bottom (~55/45 T/B) - centering reads acceptable for a 7 or better if confirmed. Surface color presents well with good registration and vivid ink; no obvious creases or staining are visible through the holder. Corners cannot be reliably assessed through the acrylic and glare - this is the key uncertainty driving the wide range; if corners are sharp the card could reach 7, but any rounding or wear would push it toward 5-6. No miscut or print snow is apparent from this view.

Centering estimate: left border appears approximately 10-12% wider than right border (roughly 60/40 L/R), top border slightly wider than bottom (approximately 55/45 T/B) — centering is acceptable in the NM-EX range. Corners: all four corners appear reasonably sharp with only very light wear visible at the lower-left and upper-right corners; no obvious rounding from this viewing distance. Edges appear clean with no major chipping or fraying, consistent with vintage Topps rough-cut norms for this issue. Surface shows good color saturation and apparent gloss retention with no visible creases, though fine surface wear and any print defects cannot be fully confirmed without a back inspection and corner macro shots — the back is unseen, and toning on white borders cannot be fully assessed, which is the primary reason for the widened range.