1966 Topps Batman Red Bat #25A In the Bat Lab

Centering estimate: left border appears narrower than right (roughly 60/40 L-R), top border appears slightly narrower than bottom (approximately 65/35 T-B) — centering is off but within EX-MT/NM range on both axes. All four corners appear to have only light wear with no obvious rounding visible at this resolution, consistent with EX-MT or better. The white borders show some typical 1966 Topps toning/aging but no alarming staining. Surface gloss appears reasonably intact with no visible creases, though the image angle and resolution make it impossible to rule out fine scratches or print defects on the surface. Back is unseen, and corner condition cannot be confirmed at high magnification — range is widened accordingly; a closer corner inspection could push this toward a 7 or pull it to a 5 depending on actual tip wear.

Centering estimate: left border appears narrower than right (approximately 65/35 L-R), top and bottom borders appear more balanced at roughly 55/45 T-B - centering is off horizontally but not severely. Corners: three visible corners appear slightly soft with very light rounding, not razor sharp but not significantly blunted - consistent with EX-MT to NM range. Surface: gloss appears reasonably intact with no visible creases confirmed by inspection, consistent with seller's 'no creases' claim; some minor print texture visible which is typical for this set. Edges appear clean with no major chipping; the rough-cut texture on the left edge is characteristic of the 1966 Topps Batman series and is not penalized. Single-photo limitation prevents corner and back assessment, and the slight camera angle obscures fine surface detail, so the range is widened accordingly.

Centering estimate: left border appears narrower than right (roughly 60/40 L-R favoring right), top border slightly wider than bottom (approximately 55/45 T-B) — centering is off but not severely so, no miscut detected. Corners: the top-left corner shows a small but visible white bump/nick visible even at this resolution, and top-right appears to have a slight push; bottom corners are better but show light rounding consistent with handled vintage stock. Surface: some light gloss loss is apparent across the face, consistent with age and handling; no obvious creases are visible from this angle, but the back is unseen. Edges appear reasonably clean with no major nicks visible; the seller's EX/EX-MT self-assessment aligns with the visible evidence, placing this in the PSA 5–6 range, with the corner wear and gloss loss nudging the point estimate toward 5.

Centering: left border appears slightly wider than right (approx 55/45 L/R), top border noticeably wider than bottom (approx 65/35 T/B), so centering is acceptable but off on the vertical axis. Corners: all four corners show some rounding/softening visible at this resolution — no sharp razor points, consistent with EX to VG-EX range. Surface: image shows some general gloss loss and light toning on the white border areas typical of vintage 1966 Topps Batman; no obvious creases visible from this angle but the back is unseen. Edges appear reasonably clean with no miscut detected; rough edge texture is normal for this issue and not penalized. Without corner close-ups and back inspection, the range is held wide; a hidden crease or heavier corner rounding could drop this to a 4, while cleaner corners and back could support a 6.