1966 Topps Batman Red Bat #27A Striking Out the Cobra — Raw

Asking range
Confirmed sales
Live listings
Index grading notes

Centering estimate: left border appears noticeably wider than right (~65-70% left), top border slightly wider than bottom (~55-60% top), suggesting off-center but not miscut. All four corners show visible rounding, consistent with a VG to VG-EX card. Surface shows significant toning/darkening across the face - this appears to be more than normal vintage print snow and likely represents gloss loss and possible light soiling or handling wear; a surface crease cannot be ruled out given the mottled darkness in the center of the card. Edges appear moderately rough but normal for 1966 Topps vintage cuts. The combination of rounded corners, surface wear/toning, and off-center presentation lands this most likely in the PSA 3 (VG) range, with PSA 2 possible if the surface toning is staining or a crease is confirmed on closer inspection.

Centering estimate: left border appears slightly wider than right (~55-60% left), top border appears wider than bottom (~60% top), putting L/R at roughly 58/42 and T/B at roughly 60/40 — acceptable for higher grades but the bottom border looks notably thin. Corners: upper-left appears reasonably sharp, upper-right shows slight softening, lower corners are harder to assess at this resolution but suggest light rounding consistent with a 5-6 range. Surface shows reasonable gloss retention with no obvious creases visible, though some minor print grain/snow is present which is normal for this issue. Edges appear clean without significant chipping; overall the card presents as an EX to EX-MT specimen, but the thin bottom border and corner softening prevent a push toward 7, and without a back scan or corner closeups the range must remain wide.

Centering estimate: left border appears approximately 10-12% narrower than right border (roughly 60/40 L/R), top border slightly tighter than bottom (approximately 55/45 T/B) - centering is acceptable for a 5-6 grade range. Corners appear to show light rounding on at least two visible corners (upper left and lower left show slight softening), consistent with EX to EX-MT range. Edges appear reasonably clean with no obvious notching visible, consistent with vintage Topps rough-cut norms. Surface gloss appears moderate with some gloss loss evident in the image but no obvious creases or staining visible; the COMC watermark partially obscures surface assessment, and without back inspection or corner macro shots, a range of 4-6 remains appropriate with EX (5) as the most likely single grade.

Centering estimate: left border appears slightly wider than right (approx 55/45 L/R), top border appears moderately wider than bottom (approx 60/40 T/B) - centering is acceptable for NM-MT range but skews slightly top-heavy. Corners appear reasonably sharp with possible very light wear on the bottom-left and bottom-right corners, consistent with EX-MT to NM condition. Surface gloss appears present and intact with no obvious creases visible in the image. Edges appear clean with no major chipping or roughness beyond normal vintage rough-cut characteristics for this set; the overall presentation suggests a mid-grade EX-MT card, though the watermark and single-photo limitation prevent ruling out hidden surface or back issues.

Centering estimate: left border appears noticeably wider than right (~65-70% left bias), top border slightly wider than bottom, rough L/R ratio ~65/35 to 70/30, T/B ~55/45 — centering is off but not catastrophically so. Corners appear lightly to moderately rounded on all four, consistent with a VG-EX to EX range; no sharp points visible at this resolution. Surface shows some wear and possible light handling marks; gloss appears partially intact but reduced. The COMC watermark obscures the center surface, preventing confident assessment of creases or print defects in that zone — widening the range accordingly. No obvious heavy creases or staining visible in accessible areas, but back is unseen and corner rounding limits the ceiling.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border appears noticeably narrower than bottom (~60/40 T/B) - centering is workable but off. Corners appear to show light rounding at two or more corners, most visible at upper-left and lower-left, suggesting wear consistent with EX to VG-EX range. Surface shows good color saturation with apparent gloss retention, no obvious creases visible from this image though the back is not shown. Edges appear reasonably clean with no miscut indicators; rough cut texture on edges is normal for this vintage issue and not penalized. Without corner closeups or back assessment, range is widened; back condition and true corner sharpness could move the grade in either direction.

Centering estimated at approximately 65/35 left-to-right and 60/40 top-to-bottom — borders are slightly uneven but within NM-MT/NM range for centering alone. Corners appear to show light rounding, particularly on the upper-left and lower-left, consistent with EX-MT to NM handling wear. Surface gloss appears reasonably intact with no obvious creases visible from this image, though the scan compression makes it difficult to confirm with certainty. Edges look clean with no major chipping or roughness beyond what is typical for this vintage set; grade is constrained to the 5-7 range pending back inspection and corner closeups, with 6 (EX-MT) as the most likely single grade given the corner softness visible.

Centering estimate: left border appears narrower than right (approximately 70/30 L/R), top border slightly wider than bottom (roughly 60/40 T/B) - off-center but not severely so and no miscut detected. Corners show light rounding on at least two visible corners (upper-left and lower-left appear softened), consistent with EX to VG-EX range. Surface shows some gloss loss and minor toning on the white border areas typical of vintage 1966 Topps Batman stock. No creases are visible from this image, edges appear reasonably clean with normal vintage rough-cut texture expected for this set. The CoMC watermark and mild scan angle prevent definitive corner and surface assessment, widening the range; back is unseen.



