1966 Topps Batman Red Bat #39A Stopping the Sub — Raw

Centering estimate: left border appears noticeably narrower than right (~60-65% right-heavy), top border slightly wider than bottom — roughly 60/40 L/R and 55/45 T/B, which would approach or reach OC territory for higher grades. Corners show visible light rounding on at least the lower-left and upper-left corners; upper-right appears slightly better but not sharp. Surface gloss appears moderate with some light wear and possible minor toning on the white border areas consistent with vintage storage. No creases are visible from this photo, but the COMC watermark partially obscures the lower center surface making a clean read difficult. No miscut is evident. This card presents most likely in the EX (5) range, with EX-MT (6) possible if corners and centering measure better in hand; VG-EX (4) is the floor if corner rounding is more pronounced than it appears.

Centering estimate: left border appears notably wider than right (roughly 70/30 L/R), top border slightly wider than bottom (approximately 60/40 T/B) - centering is off but not miscut territory. Corners show visible rounding on all four, most pronounced at lower corners, consistent with well-handled vintage stock. Surface shows evident gloss loss and some soiling/toning particularly in the lower portion of the card; there appear to be light surface scuffs or possible handling marks visible in the image area. Edges appear reasonably intact for the grade range with no obvious tears, but the overall condition package of rounded corners, gloss loss, and surface wear points to a VG (3) grade, with VG-EX (4) possible if surface issues are lighter than they appear and GOOD (2) possible if there are unseen creases on the reverse.

Centering estimate: left border ~2.5mm, right border ~4mm, top border ~3mm, bottom border ~3.5mm — L/R approximately 38/62, T/B approximately 46/54; right-heavy shift is the primary centering concern, approaching but not exceeding 65/35 threshold. Corners appear reasonably intact with only very slight blunting visible on the lower-left and upper-right corners, consistent with EX-MT to NM range wear. Edges look clean with no obvious nicks; the rough-cut texture on the left edge is normal for 1966 Topps production and is not penalized. Surface gloss appears moderate with no visible creases, though the watermark obscures center surface evaluation — some light print grain is visible which is typical for the set. Back condition unknown; range widened accordingly.

Centering estimate: left border appears slightly wider than right (approx 55/45 L-R), top border notably wider than bottom (approx 65/35 T-B), so centering is acceptable but not tight. Corners show light-to-moderate rounding on at least the lower left and lower right corners, consistent with an EX range card; upper corners appear slightly better but not sharp. Surface gloss appears present but with some visible wear and the characteristic print texture/snow common to this 1966 Topps issue. No creases are visible in this image, which is consistent with the seller's EX+ claim; however, back is unseen and corner rounding prevents a higher grade. The seller's 'Ex+' self-assessment aligns reasonably with the photo evidence, placing this in the PSA 5 range with some possibility of 4 if corners are worse than they appear, or 6 if the surface is cleaner than the print texture suggests.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border notably wider than bottom (~65/35 T/B) — moderate off-center vertically but not severe. Corners show light-to-moderate rounding consistent with an EX range card; no corner is sharp but none appears heavily blunted. Surface gloss appears present with some reduction visible, consistent with age and handling. No creases are visible in this photo, which aligns with the seller's EX+ descriptor; however the back is unseen and one photo cannot rule out spine stress or hidden surface breaks. The rough-cut edges typical of 1966 Topps Batman production are present and are not penalized. Range reflects uncertainty about corners and back condition — a clean back and tighter corner inspection could push toward 6, while any hidden flaw or more wear on corners would pull toward 4.