1977 OPC Star Wars #28 Luke agrees to join Ben Kenobi

Centering estimate: left border appears notably wider than right (~65/35 L-R), top and bottom borders look roughly even (~55/45 T-B), so horizontal off-centering is the primary concern, consistent with a grade cap around EX-MT or NM territory. Corners appear lightly worn with some blunting visible on at least the bottom-left and bottom-right corners, consistent with EX to EX-MT range. Blue borders show minor chipping/wear along the edges, which is typical for this issue but does cost grade points. Surface gloss appears reasonably intact with no obvious creases visible, though the sleeve glare and watermark obscure the center of the card, preventing a confident surface read. The bilingual caption confirms OPC printing but printer identity does not affect grade; overall condition reads most likely EX-MT (6) with NM (7) possible if corners are sharper than they appear.

Centering estimate: left border appears narrower than right (roughly 60/40 L-R favoring right), top border slightly wider than bottom (approximately 55/45 T-B) — centering is acceptable but not tight. Blue border chips are visible along the left and bottom edges, consistent with typical OPC/Topps Star Wars border wear. Corners show light-to-moderate rounding, particularly on the lower-left and lower-right corners, consistent with EX to VG-EX range. Surface appears reasonably clean with no obvious creases visible in this scan, and the photo image retains decent gloss, though fine surface wear cannot be fully ruled out at this resolution. No miscut detected; no staining or writing observed.

Centering estimate: left border appears notably narrower than right (roughly 70/30 left-right), top and bottom borders appear more balanced at approximately 60/40 — centering is a meaningful concern. The blue border shows visible chipping/wear along edges, particularly noticeable on the left and bottom sides, which is typical of this issue but still grade-relevant. Corners are difficult to assess precisely at this resolution but appear to show light-to-moderate rounding, consistent with EX to VG-EX range. Surface gloss appears partially intact with some loss visible; no creases are detectable from this photo, though the back cannot be assessed. The OPC origin is confirmed by the bilingual caption; the coarser stock and cut quality typical of OPC are consistent with what is visible here.