1977 OPC Star Wars #38 Luke and Han in the refuse room

Centering estimate: left border appears noticeably wider than right (~65/35 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is off but not extreme, consistent with EX-EX/MT range. Blue border shows some chipping/wear along the left and bottom edges, which is typical of OPC blue-border Star Wars but still a grade factor. Corners appear to have light rounding visible on at least two corners (upper-left and lower-right show slight softening), consistent with EX grade. Surface gloss appears partially present with some dulling; no creases are visible in this photo but the image resolution limits confidence on fine surface defects. Photo quality is good but no corner macro shots available, so the range is widened accordingly.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border noticeably wider than bottom (~65/35 T/B), so centering is acceptable but not tight. Blue borders show some chipping/wear on the edges, particularly bottom-left near the starburst logo. Corners are not razor-sharp at this resolution — the two visible corners (top-right, bottom-right) show light rounding consistent with EX-MT to NM range; the left corners are partially obscured by card angle but appear similarly worn. Surface gloss appears moderate with no visible creases or major staining. OPC stock tends to be lighter and the cut coarser, which is consistent here, but no miscut or adjacent card printing is visible.

Centering: left border appears noticeably wider than right (~65/35 L/R), top and bottom borders look roughly equal (~55/45 T/B) — centering is off but not catastrophic. Blue borders show some visible chipping/wear along the left and bottom edges, typical of this issue but grade-relevant. Corners appear to have light rounding on at least two corners (especially bottom-left and bottom-right visible in this scan), consistent with EX-MT to NM range. Surface gloss appears mostly retained with no obvious creases visible, though the scan resolution limits a definitive call on surface scratches or print defects. The combination of corner softness and blue-border edge chipping points to a PSA 6 EX-MT as the most likely grade, with NM (7) possible if corners hold up under closer inspection.

Centering: left border appears roughly equal to right (~55/45 L/R), top border slightly thicker than bottom (~60/40 T/B) — centering is acceptable but not tight. Blue border shows some chipping/wear visible particularly along the bottom and left edges, consistent with typical OPC stock fragility. Corners appear to have light-to-moderate rounding, with the bottom-left corner showing the most visible wear; none appear sharp enough for NM territory. Surface gloss appears partially retained but with some light wear visible; no creases are evident from this photo though the scan resolution limits fine-surface assessment. The card presents in the EX to EX-MT range, with corner and edge wear being the primary grade-limiting factors.