1977 OPC Star Wars #50 Rebel leaders wonder about their fate!

Every grade of this card
| Grade | Live | Asking range | Last confirmed sale | Est. grade (ours) |
|---|---|---|---|---|
| Raw | 5 | $3.70 – $15.77 | $2.00 2026-09-03 | 5.0 |
Confirmed sales — all grades
| Date | Grade | Price | Confidence |
|---|---|---|---|
| 2026-09-03 | Raw | $2.00 | HIGH |
Index grading notes

Centering estimate: left border appears slightly narrower than right (roughly 60/40 L-R), top border appears slightly wider than bottom (roughly 55/45 T-B) — centering is acceptable but not tight. Blue borders on 1977 OPC/Topps Star Wars are notorious for chipping; the bottom-left corner shows some rounding and the starburst area obscures that corner's condition. The top-right and bottom-right corners appear to have light wear but no obvious heavy rounding or creasing is visible at this resolution. Surface gloss appears moderate with no obvious creases detectable, but the image resolution and sleeve glare prevent confident assessment of edge wear, print defects, or fine corner condition. Range is wide due to photo limitations — a corner closeup could easily push this toward a 4 (VG-EX) if rounding is more significant than it appears, or a 6 (EX-MT) if the corners clean up well.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is acceptable and not a major grade deductor. Blue borders show visible chipping/wear along all four edges, most notably the left and bottom edges where the blue appears worn or nicked — consistent with typical OPC stock handling. Corners appear to have light-to-moderate rounding; no corner is sharp enough to suggest EX-MT or better, but no corner is fully blunted to VG territory either. Surface gloss appears moderate with some loss visible, no obvious creases detected from this image though the photo quality and sleeve glare obscure fine surface detail. Overall condition consistent with EX (5) range, with edge/border wear being the primary grade limiter; a VG-EX (4) floor is set given the visible blue border chipping.