1977 OPC Star Wars Stickers #10 Tusken Raider — Raw

Centering: the yellow die-cut border appears slightly left-heavy (~60/40 left-to-right) and top-heavy (~60/40 top-to-bottom) — within acceptable NM-range territory but not tight. The die-cut edges look clean with no obvious nicks or tears along the irregular border, which is the primary wear point on these stickers. Surface gloss appears moderate with no visible creases or staining, though the scan resolution limits fine surface-wear assessment. Corners on die-cut stickers grade differently than base cards — the four rectangular 'background' corners (top-left, top-right, bottom-left, bottom-right of the sticker sheet) appear reasonably sharp but show slight softening consistent with a 6 EX-MT grade; upgrading to 7 is possible if corners hold up under closer inspection.

Centering: the yellow die-cut border appears reasonably balanced left/right (approximately 55/45) and top/bottom (approximately 60/40), within acceptable range. Corners cannot be assessed with high precision at this distance but appear to show mild rounding — no sharp points visible, suggesting light wear consistent with EX-MT to NM range. The image surface looks clean with no obvious creases, staining, or print defects visible; gloss appears intact. The die-cut edge is a normal feature of this sticker issue and not penalized; however, the photo does not allow close corner inspection, so the range is widened to reflect that uncertainty.

Centering: the yellow die-cut border appears slightly uneven — left side border is marginally wider than the right (~55/45 L/R), and the top border appears slightly fuller than the bottom (~60/40 T/B), within acceptable range for the grade. The die-cut edge appears intact with no visible chips or tears along the sticker outline. Corners on the underlying card stock are not easily evaluated on a die-cut sticker, but no severe rounding or creasing is visible on the surface imagery or title banner. Surface gloss appears moderate with no obvious scratches, creases, or print defects visible at this resolution, though fine surface wear cannot be fully ruled out. The green title banner and copyright line read cleanly; overall presentation suggests an EX-MT to NM range, with the printer (Topps vs OPC) indeterminate from the front.