1977 OPC Star Wars Stickers #4 Chewbacca the Wookiee — Raw

Centering on the sticker die-cut shape appears reasonably centered within the card stock, approximately 60/40 left-right and 65/35 top-bottom, though the die-cut nature makes precise ratio assessment difficult. The image photo shows some overall color fading/toning consistent with age, and the surface appears to have moderate gloss loss — the sticker face looks somewhat dull rather than vibrant. Corner condition on the underlying card stock is hard to isolate from the sticker's own die-cut edges, but no severe rounding or creasing is visible; edges of the sticker appear intact without peeling. The yellow title banner shows no obvious crease lines but the overall surface patina and gloss loss points to an EX-range grade, with uncertainty spread wider given the single overhead photo cannot reveal back condition, corner tips, or any hidden surface issues.

Centering on the sticker within its backing appears roughly 60/40 left-right and 55/45 top-bottom — acceptable for the issue. The green die-cut border shows no obvious chipping but the photo resolution makes fine edge and corner inspection difficult; the die-cut edges appear intact without tearing or fraying. Surface gloss looks present with no immediately visible creases, but the scan compression prevents confident assessment of subtle surface wear or print defects. Corners on the sticker itself are hard to isolate given the die-cut shape, but no severe rounding is apparent; range is widened to account for back condition, hidden corner detail, and possible light surface wear not resolvable at this resolution.

Centering on the sticker die-cut itself appears reasonably balanced left/right (approximately 55/45) and top/bottom (approximately 60/40), though the outer card stock shows the sticker is positioned slightly high and left. The green border shows some wear and the die-cut edges appear slightly rough in places, consistent with age. Corner detail is difficult to assess precisely at this resolution but at least two corners appear to show light rounding. Surface shows no obvious creases but the image quality and scan angle make it difficult to fully assess gloss loss; there is some visible toning/wear around the sticker border area that suggests light handling wear consistent with an EX grade range.

Centering on the sticker die-cut itself appears reasonably balanced left/right (roughly 55/45) and top/bottom (roughly 60/40), but the outer card stock shows uneven dark borders — left border noticeably wider than right, suggesting moderate off-center on the backing card, estimated 70/30 L/R. Corners on the die-cut sticker are difficult to assess precisely at this resolution but appear lightly rounded with no sharp points visible, consistent with EX to VG-EX range. Surface gloss appears intact with no obvious creases, staining, or heavy scratches evident; the sticker image itself is clean and bright. Edge wear along the outer card borders is modest; the die-cut perimeter looks intact without significant lifting or peeling, but fine corner detail is obscured by photo resolution — range widened accordingly.

Centering: the green die-cut sticker sits within its black card background asymmetrically but that is typical for this issue; the sticker itself appears left-heavy approximately 60/40 L/R and reasonably balanced top/bottom, no adjacent card printing visible so not miscut. Corners on the sticker die-cut edge show some soft rounding — particularly visible at lower-left and upper-right — consistent with EX to EX-MT range. Surface gloss appears moderate with no obvious creases visible in the photo, but the image does not provide tight corner closeups so hidden rounding or edge wear cannot be ruled out. The black card border shows slight edge roughness on the right side; overall condition reads as EX range with the sticker possibly holding slightly better than the card stock beneath it.

Centering on the sticker itself appears reasonably balanced left/right (~55/45) and top/bottom (~60/40), with no obvious miscut. The green die-cut border looks intact with no visible chipping or major edge wear. Surface gloss appears present and the image is clean with no obvious print defects, creasing, or staining visible. Corners on the sticker's printed area are difficult to assess precisely at this resolution — they appear intact but show possible light softening; no sharp rounding evident, suggesting a grade in the EX-MT to NM range, though corner closeups would be needed to push toward the upper end.

Centering: the green die-cut border appears reasonably centered within the card stock — left/right black outer margins look approximately 55/45, top/bottom approximately 60/40, so centering itself is not a major issue. Corners: at this resolution the four corners of the die-cut sticker show some rounding, particularly noticeable at bottom-left and top-right, suggesting light-to-moderate wear consistent with EX to VG-EX range. Surface/gloss: the sticker image appears to retain reasonable gloss with no obvious creases visible, though the coarser scan angle and slight color variation near edges could be masking light surface wear. The yellow caption banner shows no obvious staining or tears; overall the card presents as EX (5) with range widened to account for corner condition uncertainty not fully resolvable at this photo resolution.