1977 Topps Star Wars #160 Destroying a world!

Centering estimate: left border appears slightly wider than right (~55-60% left), top border appears noticeably larger than bottom (~60-65% top), putting L/R near 58/42 and T/B near 62/38 — within NM-MT range for horizontal but slightly pushed on vertical. The yellow border shows no obvious chipping or major edge wear. Corners appear moderately sharp with possible very light rounding on one or two corners visible at this resolution, consistent with EX-MT to NM range. Surface gloss appears reasonably intact with no visible creases or staining. The back is not visible, and corner/edge detail is somewhat limited at full-card scan distance, so a range of 5-7 is appropriate — a closer inspection of corners and edges could push this up toward 7 or down toward 5.

Centering estimate: left border ~7mm, right border ~5mm, top border ~6mm, bottom border ~8mm — roughly 58/42 L/R and 57/43 T/B, which is acceptable for a mid-grade but not tight enough for 8+. The yellow borders show no obvious chipping or heavy wear, and the surface image appears clean with good gloss retention. Corners are difficult to assess with full precision at this scan distance, but they appear to have only light to moderate rounding — consistent with an EX-MT range. No visible creases, staining, or print defects are apparent, though a back inspection and corner close-ups would be needed to confirm the upper end of this range.

Centering estimate: Left border appears slightly wider than right (~55-60% left), top border appears slightly wider than bottom (~55% top) — call it approximately 58/42 L/R and 55/45 T/B, which is within NM-MT range on centering alone. The yellow borders show no obvious chipping or major wear visible at this resolution. Corners appear reasonably sharp with possible very light wear on one or two corners, consistent with a 7-8 range, but the camera angle and perspective distortion on the left side make precise corner assessment difficult. Surface gloss appears intact with no obvious creases or staining visible; print quality looks typical for the set. The uncertainty range reflects inability to closely examine all four corners and card edges for micro-wear, which is the typical differentiator between a 7 and 8 on this issue.