1977 Topps Star Wars #19 Searching for the little droid — Raw

Centering: Left border appears slightly wider than right (~55/45 L/R), top border appears slightly wider than bottom (~55/45 T/B) — reasonably well-centered for the series, no OC concern. Corners: At this resolution the corners appear to show light wear, particularly the lower-left and upper-right which show subtle rounding consistent with EX to EX-MT range; no sharp PSA-8 corners evident. Blue border edges show some expected chipping/wear typical of this set but not severe. Surface appears to have decent remaining gloss with no visible creases, staining, or print defects beyond typical set-issue print grain. The seller's 'EX to EX-MT' self-description aligns with what is visible; cannot confirm back condition or true corner sharpness without tighter photography, so range is widened accordingly.

Centering estimate: left border appears narrower than right (roughly 60/40 L-R favoring right), top border appears slightly wider than bottom (roughly 55/45 T-B) — within EX-MT tolerances. Blue borders show no obvious chipping or heavy edge wear visible at this resolution, though the soft image makes fine edge detail hard to confirm. Corners appear to have only light to mild rounding with no sharp points clearly visible, consistent with EX to EX-MT range. Surface gloss appears reasonably intact with no obvious creases, staining, or print defects beyond typical 1977 Star Wars print grain; however, the sleeve reflection and image softness prevent confident corner and surface assessment, warranting a widened range.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border appears moderately wider than bottom (~60/40 T/B) — centering is imperfect but not severely off. The blue border shows visible chipping/wear consistent with this issue's known fragility, particularly noticeable along the top edge where the blue shows whitening. Corners appear to have light-to-moderate rounding — no sharp points visible, consistent with EX to VG-EX range. Surface shows some gloss loss and the image appears slightly washed/faded which is typical print quality for this series but limits the ceiling. No creases are visible from this angle, though the card stand blocks the bottom edge. A back inspection would be needed to confirm absence of creases or staining.