1977 Topps Star Wars #207 C-3PO (Anthony Daniels) — Raw

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border visibly thinner than bottom (~60/40 T/B) - centering is passable but not tight. Green borders show moderate chipping/wear along all four edges, which is typical for this series but still grade-relevant. Corners appear lightly to moderately rounded - no sharp points are visible at this resolution, suggesting wear consistent with EX to VG-EX range. Surface shows some print grain/texture consistent with the era but no obvious creases are visible; gloss appears partially intact with some dulling. The card stand obscures the bottom edge and lower corners slightly, preventing a definitive corner assessment - the range is widened accordingly.

Centering estimate: left/right borders appear approximately 55/45 to 60/40 favoring left, top/bottom roughly 55/45 — acceptable for NM-MT range. Green borders show no obvious chipping visible at this resolution. Corners appear reasonably sharp with at most very light wear on one or two corners, consistent with NM to NM-MT; no corner is visibly blunted or rounded. Surface gloss appears intact with no obvious creases, staining, or print defects beyond typical Star Wars series print quality. The single overhead photo limits assessment of corner sharpness and back condition; the range reflects that uncertainty, with the card most likely landing at PSA 7 NM given the mild corner wear suggested at this resolution.

Centering estimate: left border appears noticeably narrower than right (~70/30 L/R), top and bottom borders look closer to 55/45 T/B — centering is off but not catastrophically so for this series. Corners appear to show light rounding on at least two visible corners (lower-left and upper-left), suggesting wear consistent with EX to VG-EX range. The green border shows no obviously heavy chipping but some edge wear is plausible at this resolution. Surface gloss is difficult to evaluate from this scan — no obvious creases or staining are visible, but the image resolution and compression prevent confident assessment of fine surface flaws, print defects, or back condition. Range widened due to limited photo clarity.