1977 Topps Star Wars #234 Envisioning the Rebel's destruction

Centering estimate: left green border appears approximately 5-6mm, right border 4-5mm giving roughly 55/45 L/R — acceptable; top border appears slightly wider (~6mm) versus bottom (~4mm) suggesting perhaps 60/40 T/B — within NM-MT range. Corners: all four corners appear reasonably sharp at this resolution but the sleeve glare and image scale prevent a definitive close-up assessment; no obvious blunting or rounding visible, but soft wear on one or two corners cannot be ruled out. Surface and gloss: the photo image area shows good gloss with no visible creases, staining, or print defects noted; some minor print grain consistent with the series is present. Green border chipping — a known vulnerability for Series 4 — cannot be fully assessed through the sleeve; no obvious chips are visible but edges warrant close inspection under better lighting before final grade assignment.

Centering estimate: left/right borders appear approximately 60/40 and top/bottom approximately 55/45 — acceptable for NM range on this issue. The green border shows no obvious chipping visible at scan resolution, but the sleeve glare along the left edge partially obscures that corner. All four corners appear reasonably sharp with at most very slight softening on the bottom-left corner; no rounding is clearly evident. Surface gloss appears intact with no visible creases or staining; print quality looks clean with good color saturation. The sleeve/soft case introduces minor glare that prevents confident corner and edge assessment, widening the range — a NM 7 is the most likely grade but NM-MT 8 is possible if corners hold up under direct inspection.

Centering estimate: left border appears slightly wider than right, approximating 60/40 L/R; top border visibly wider than bottom, roughly 65/35 T/B — within NM-MT range on the horizontal axis but the vertical skew nudges toward NM territory. The green border shows no obvious chipping or notable wear along the edges visible in this shot. Corners appear reasonably sharp at this resolution but the scan does not allow close corner inspection — two or three corners may show very slight blunting consistent with a PSA 7 NM grade. Surface gloss looks intact with no visible creases, print defects, or staining. The single-photo, no-corner-closeup limitation forces a wide range; back condition, which could reveal creases or staining, is unknown.