1977 Topps Star Wars #260 Han Solo (Harrison Ford)

Centering estimate: left border appears noticeably wider than right (roughly 65-70% left / 30-35% right), and top border slightly wider than bottom (approximately 60/40 T/B) — off-center but not extreme. Corners show visible rounding on at least two corners visible in frame, consistent with EX to VG-EX range. Yellow border shows some chipping/wear along edges, typical of this series but reducing grade. Surface gloss appears moderately intact with no obvious creases visible from this scan, though the image resolution limits confidence in detecting light surface creases or print defects. Overall condition most consistent with PSA 5 EX, with 4 possible if corner rounding is more pronounced on the reverse side or hidden edges.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border visibly wider than bottom (~60/40 T/B) — acceptable for this series. Corners: top-right and bottom-right show slight softening visible at this resolution; top-left appears reasonably sharp; bottom-left partially obscured by starburst graphic and holder glare. Surface: photo stock shows typical 1977 Topps print texture/grain; no obvious creases or major scratches visible, gloss appears intact but slightly dulled. Yellow borders on this series are less prone to chipping than blue-border series cards, which works in this card's favor; corner wear is the primary limiting factor, suggesting a range of EX to NM with EX-MT most likely.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border appears slightly tighter than bottom (~55/45 T/B) — acceptable for a vintage 1977 Topps Star Wars issue. Yellow border shows no obvious chipping at the visible edges. Corners appear reasonably sharp with possible very light wear on one or two corners, consistent with a NM range card, but corner detail is slightly obscured by the sleeve glare in the upper area. Surface gloss appears intact with no visible creases, staining, or print defects. Back is unavailable for inspection; range widened accordingly as centering and corner condition cannot be fully confirmed.

Centering: left border appears slightly wider than right (~55/45 L/R), top border noticeably wider than bottom (~60/40 T/B) — centering is acceptable for a PSA 7 or better in both axes. Corners: all four corners appear to have some minor wear/softening visible at this resolution, particularly the lower corners; no sharp razor points evident, consistent with EX-MT to NM range. Surface: photo stock shows reasonable gloss retention with no obvious creases, scratches, or print defects visible; the yellow border shows no obvious chipping. Edges appear clean with no significant fraying visible, but the single front-only photo limits corner and edge assessment precision, so the range is widened accordingly.