1977 Topps Star Wars #268 Ben prepares to turn off the tractor beam — Raw

Centering estimate: left/right borders appear approximately 60/40 favoring left, top/bottom roughly 55/45 — within NM-MT tolerance on both axes. Corners appear reasonably sharp from this distance; no obvious rounding is visible on any of the four corners, though the slight camera angle limits confidence on the far corners. The orange border shows no obvious chipping or edge wear, and the surface gloss appears intact with no visible creases or print defects. The single-angle photo prevents assessment of the back and close corner inspection, so a range of 6–8 reflects that uncertainty; a point estimate of 7 NM accounts for the possibility of subtle corner or edge wear not fully resolved at this resolution.

Centering estimate: left border appears slightly wider than right (roughly 60/40 L-R), top border slightly wider than bottom (roughly 55/45 T-B) — centering is acceptable for NM range. Orange borders show no obvious chipping visible at this resolution. Corners appear reasonably sharp with possible very light wear on one or two corners, consistent with NM to EX-MT range. Surface gloss looks intact with no visible creases or major print defects. The seller's '7oe' notation likely indicates an OC (off-center) qualifier concern, which aligns with the modest left-right lean observed; if PSA flags the centering as OC it would likely assign a numeric grade in the 6-7 range with qualifier, so the range reflects that uncertainty.