1977 Topps Star Wars #272 Corridors of the Death Star

Centering estimate: left border appears slightly wider than right (~60/40 L/R), top and bottom borders look roughly even (~55/45 T/B) — centering is acceptable for a PSA 5-6 range. The orange border shows visible chipping or wear along the left edge, consistent with typical 1977 Star Wars border fragility. Corners appear to have light rounding at two or three corners, most visibly at bottom-left, suggesting wear consistent with EX to VG-EX territory. Surface gloss appears partially intact but the holder glare obscures fine detail and any surface scratches. No creases are visible from this photo, but the soft sleeve limits full corner and edge inspection — range is widened accordingly.

Centering estimate: left orange border appears roughly 10-11% of card width, right border slightly wider at ~12-13%, giving left/right near 45/55 — acceptable for this series. Top border appears slightly narrower than bottom, approximately 40/60 top-to-bottom, which is within NM-MT tolerance. Corners appear to have light rounding on at least the visible corners — no razor-sharp points evident at this resolution, consistent with EX-MT to NM range. Surface gloss appears present but shows some typical scuffing or light wear consistent with the vintage of the card; no obvious creases are visible. Edge quality on the orange border looks intact without major chipping, though the full perimeter cannot be confirmed from this single scan.

Centering estimate: left/right borders appear approximately 60/40 favoring left, top/bottom roughly 55/45 — within NM-MT tolerance on top/bottom but slightly left-heavy L/R; overall centering reads NM territory. Corners appear reasonably sharp with at most very light wear on the visible corners, no obvious blunting detectable at this resolution. The orange border shows no significant chipping or fraying visible along the edges. Surface gloss appears intact with no obvious creases, staining, or print defects visible, though the camera angle and minor glare in the lower-left prevent a definitive read on corner sharpness and surface texture — a tighter corner closeup would tighten this range considerably.