1977 Topps Star Wars #298 Chewie gets riled!

Centering estimate: left border appears slightly narrower than right (roughly 55/45 L/R), top border appears moderately narrower than bottom (roughly 60/40 T/B) — acceptable for this set. The orange borders show no obvious chipping visible from this distance. Corners appear to have light rounding on at least two corners (most visible at lower left and upper right), suggesting moderate wear consistent with EX-MT to NM range. Surface gloss appears reasonably intact with no obvious creases or heavy scuffing visible, though fine print defects and gloss loss are difficult to fully assess at this resolution. Back condition is unknown; a PSA 6 EX-MT is the most likely outcome given the corner wear, with upside to 7 if corners prove cleaner under inspection.

Centering: left/right borders appear approximately 60/40 favoring left, top/bottom roughly 55/45 favoring top — within NM-MT range horizontally but overall centering lands around EX-MT territory. The orange borders show some chipping/wear consistent with this set's known vulnerability, particularly visible along the left and bottom edges. Corners appear to have light rounding — not razor sharp but not heavily blunted, consistent with EX to EX-MT range. Surface gloss appears reasonably intact with no obvious creases visible in this image, though the photo angle limits full assessment of surface wear and the reverse is unseen. Back condition, corner rounding under magnification, and any hidden print defects could move this grade a point in either direction.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border appears modestly wider than bottom (~60/40 T/B) — centering is acceptable for a PSA 7 or better. The orange borders show no obvious chipping visible at this resolution. Corners appear to have light-to-moderate wear with some slight rounding evident, particularly on the lower corners, which pushes the grade toward EX-MT range rather than NM. Surface gloss appears present but the image resolution prevents confident assessment of print defects or fine scratches. Without corner closeups or back inspection, a range of 5–7 is appropriate; the point estimate of 6 (EX-MT) reflects visible corner softening with otherwise clean presentation.