1977 Topps Star Wars #30 Han in the Millennium Falcon

Centering estimate: left border appears slightly wider than right (~60/40 L/R), top border modestly wider than bottom (~55/45 T/B) — within NM-MT tolerances horizontally but the asymmetry nudges toward NM territory. Blue borders on this series chip readily; the right and bottom borders show what appears to be minor chipping/wear consistent with a grade-7 card. Corners look reasonably sharp in this scan but the image resolution prevents confident close-up assessment — at least one or two corners appear to have very light blunting. Surface gloss appears intact with no visible creases, which is encouraging, but the scan compression limits evaluation of print snow or surface scratches. Seller's NM-MT claim seems optimistic; NM (7) is the most defensible single estimate pending back inspection and corner examination under loupe.

Centering estimate: left border notably wider than right (~65/35 L/R), top and bottom borders appear roughly even (~55/45 T/B) — off-center left-to-right is a meaningful flaw. Blue borders show visible chipping and wear along all four edges, most pronounced at the top-left and bottom corners. All four corners appear rounded to some degree — upper-left and lower-left show the most softening with what looks like light fraying, consistent with VG to VG-EX range. Surface gloss appears partially intact but dulled, with scuffing or handling wear visible across the face; no crease is confirmed from this single photo though the image resolution does not rule one out. Overall condition indicators place this card solidly in the PSA 3 (VG) range, with PSA 2 possible if a hidden crease is present and PSA 4 reachable only if corners are better than they appear at this distance.

Centering estimate: left border appears slightly wider than right, roughly 55/45 L-R; top border appears moderately wider than bottom, approximately 60/40 T-B — acceptable for this issue. Corner inspection reveals visible rounding on at least the bottom-left and bottom-right corners; top corners appear slightly better but show some wear. Surface shows mild gloss loss overall with some light handling marks visible; no obvious creases detected from this photo but the resolution limits a definitive call. Edges appear reasonably clean without major nicks. The film-strip border design characteristic of Series 3 is intact with no heavy chipping visible, consistent with a mid-grade EX to EX-MT range; the corner rounding prevents a push toward NM territory.