1977 Topps Star Wars #50 Rebel leaders wonder about their fate!

Centering estimate: left border appears slightly wider than right (~55/45 L/R acceptable), top border noticeably thinner than bottom (~60/40 T/B borderline). The blue borders show visible chipping and wear particularly along the top and left edges, consistent with typical Star Wars blue-border handling wear. Corners appear rounded at all four points - most evident at the lower-left and upper-right - consistent with VG-EX to EX range. The seller's bracketed '[C]' in the title may signal a crease, but no crease is definitively confirmed from this single front photo; surface gloss appears present but dulled. Edge wear is moderate. The combination of corner rounding, border chipping, and possible surface issues points to a PSA 4 (VG-EX) as most likely, with EX (5) possible if the back is clean and no crease is confirmed.

Centering estimate: left blue border appears roughly 10–12% wider than right, top border slightly wider than bottom — approximate L/R ~55/45, T/B ~55/45, within EX-MT range. Blue borders on this series chip readily; the borders here look fairly intact with no obvious chipping visible at this resolution, though fine edge wear cannot be ruled out. Corners appear lightly worn — not sharp enough for NM-MT but not visibly rounded to the naked eye, consistent with EX to EX-MT range. Surface gloss looks reasonably well-preserved with no obvious creases or staining; print quality is typical for this issue. The seller's title of EX-MT aligns with this assessment, but corner and edge detail at this photo scale limits confidence — a PSA 5–6 range is most defensible, with 6 as the point estimate.

Centering estimate: left border appears narrower than right (~55% right-heavy), top border slightly wider than bottom — approximate L/R ~60/40, T/B ~55/45, within EX-MT tolerance but leaning off. Blue borders show visible chipping/wear along the left and bottom edges, consistent with this set's known border fragility — several small nicks are discernible. Corners: the top-left and bottom-left corners show light rounding under inspection; top-right and bottom-right appear slightly better but not sharp. Surface shows scattered light scratches or print scuffs across the photo area, with modest gloss retention overall. No visible creases are evident from this angle, which is consistent with the seller's EX-MT+ claim, but the border wear and corner softness push this into the EX (5) range rather than EX-MT (6); a VG-EX (4) floor is set in case the back or corners are worse than they appear.

Centering estimate: left blue border appears slightly wider than right (~55–60% left), top border slightly wider than bottom (~55% top) — roughly 60/40 L/R and 55/45 T/B, within NM-MT tolerance but not tight. Blue border shows no obvious chipping visible at this resolution, which is a positive sign for this issue. Corners appear reasonably sharp on the top pair but the bottom corners, particularly bottom-left near the starburst logo, are harder to assess clearly due to the graphic overlay. Surface gloss looks present with no obvious scratches or print defects visible, though the scan resolution limits fine-detail corner and edge inspection. The seller's NM-MT claim is plausible but cannot be confirmed without corner closeups; a grade of 7 NM is the most defensible estimate given the moderate centering and unverifiable corner condition.