1977 Topps Star Wars Stickers #10 Tusken Raider

Centering estimate: left/right borders appear roughly 55/45 and top/bottom roughly 60/40 — acceptable for the grade range, no severe miscut visible. The sticker die-cut edges appear intact with no obvious tears or paper loss along the perimeter. Corner assessment is significantly hampered by the sleeve and image resolution; corners appear to show mild rounding consistent with light handling but no sharp crisp points are discernible, suggesting EX-MT to NM territory. Surface gloss appears moderate with no obvious creases or heavy scuffing visible, though the sleeve glare obscures the lower half and the green caption banner area; a raw submission could land anywhere from PSA 5 to 7 depending on what sharper corner inspection and the reverse reveal.

Centering on the sticker die-cut itself appears reasonably well centered within its yellow border — left/right roughly 50/50, top/bottom perhaps 55/45 top-heavy, acceptable for this issue. The sticker sits on a black backing card and the backing card itself shows moderate off-centering with a noticeably wider right border than left, but PSA grades the sticker unit as presented. Corner tips on the die-cut are slightly soft/rounded — particularly the upper-left and lower-right — suggesting handling wear consistent with EX-MT to NM range. Surface gloss appears intact with no visible creases or staining; the image is clean and color is strong. Back cannot be assessed from this photo, and corner sharpness cannot be confirmed at high resolution, so the range is kept wide from EX to NM.

Centering on this die-cut sticker appears reasonably well centered within its yellow border — left/right roughly 55/45 and top/bottom approximately 60/40, which is acceptable. The seller's title self-discloses 'VG' condition despite claiming 'sharp corners,' which warrants caution; corners visible in the photo do show some light rounding on the lower-left and upper-left, consistent with VG-EX to VG range rather than truly sharp. Surface gloss appears present but slightly muted, with no obvious creases visible in this image though the title does not explicitly disclaim them. The die-cut edges appear clean without chipping, but the plastic sleeve creates enough glare on the upper-right to obscure that corner detail, widening the range downward to accommodate a possible hidden flaw.

Centering: the die-cut sticker sits within the black card backing — left border approximately 60%, right approximately 40%, top approximately 55%, bottom approximately 45%; centering is slightly off but within NM-MT tolerances for the sticker portion itself. Corners on the yellow die-cut border appear lightly worn at the upper-right and lower-left, suggesting light rounding consistent with EX-MT to NM range. Surface gloss appears reasonably intact with no obvious creases, scratches, or staining visible on the sticker face. The black backing card shows some edge wear on the right side, and the two-asterisk copyright line suggests this may be an O-Pee-Chee printing, which cannot be confirmed without examining the back; that determination could affect market value but not the PSA grade itself.