1977 Topps Star Wars Stickers #14 The Tusken Raider — Raw

Centering: the die-cut red border appears slightly left-heavy and top-heavy — left red border roughly 60–65% vs right 35–40%, top border ~55% vs bottom ~45%, so centering is within the 7–8 range and not an immediate grade-killer. Corners: at this resolution the corners appear reasonably intact with no obvious rounding or creasing, though the image is not sharp enough for confident corner assessment — I cannot rule out light wear on the tips. Surface: the sticker surface shows no obvious creases, staining, or print defects visible; gloss appears present but some glare from the sleeve makes full surface evaluation difficult. The red die-cut border shows no visible chipping or border wear that I can confirm, but border condition on stickers is harder to assess than base cards; given the typical condition survivorship of 1977 stickers and the inability to confirm corner crispness at this zoom level, a range of 5–7 is appropriate with EX-MT (6) as the most likely single grade.

Centering estimate: left red border appears slightly wider than right (~55/45 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is solid for this notoriously wandering issue. The die-cut edge appears clean with no obvious chipping of the red border. Corners are not fully visible at high resolution but show no dramatic rounding; they appear lightly worn rather than sharp, consistent with EX to EX-MT range. Surface gloss looks reasonably intact with no visible creases, though the sticker substrate and sleeve glare limit a firm read. A back inspection and corner macro shots would be needed to confidently separate a 5 from a 7; the seller's 'EX' call seems fair, placing the point estimate at PSA 6 EX-MT.

Centering: the red die-cut border appears reasonably balanced left/right (approximately 55/45) and top/bottom (approximately 60/40), within acceptable range for the grade. The sticker face image itself shows good color saturation and gloss with no obvious creases visible. Corners on the die-cut sticker are harder to assess precisely due to the irregular shape, but the peeled sticker edges appear intact with no obvious fraying or heavy rounding visible. The card back and fine corner detail cannot be assessed from this single front photo, and the die-cut edges are typical for this sticker issue; overall condition presents as EX-MT to NM range pending back inspection.

Centering on the sticker itself appears reasonably well-centered left/right (~55/45) and top/bottom (~60/40), though the die-cut nature makes precise border measurement difficult. The red die-cut border shows no obvious chipping or heavy wear. Corners of the sticker appear slightly soft but not aggressively rounded — consistent with EX-MT to NM range. Surface gloss appears intact with no visible creases, though the single front photo cannot confirm the back or sticker peel status, which is critical for this issue (unpeeled stickers grade higher). No obvious print defects or staining visible. Grade capped at 7 pending back/sticker condition confirmation.

Centering: the red die-cut sticker border appears slightly wider on the left (~55%) vs. right (~45%) and top (~55%) vs. bottom (~45%), which is within acceptable range for this issue. The corners of the sticker's die-cut edge appear intact with no obvious rounding or fraying visible at this resolution, suggesting at least EX-MT condition. Surface gloss looks reasonably well-preserved with no obvious creases or major staining visible; print quality appears clean with good color saturation. The photograph does not allow close inspection of the die-cut edge condition or the card's physical corners/edges well enough to rule out minor wear, so the range is widened accordingly — back condition and fine corner detail are unverifiable from this image.

Centering on the die-cut sticker itself appears roughly 60/40 left-right and 65/35 top-bottom within the red border outline, which is acceptable for the issue. The corners of the underlying card stock show visible rounding — particularly the bottom-left and bottom-right — consistent with a VG-EX range. The surface image area appears reasonably intact with no obvious creases in the photo area, but there is some gloss loss and the card shows general handling wear. The photo angle obscures the bottom corners and edges somewhat, so a hidden crease or more severe corner wear cannot be ruled out; back condition is also unknown.

Centering: the red die-cut border appears roughly even left/right (approximately 55/45) and slightly tighter at top than bottom (approximately 60/40), consistent with NM-MT range centering. Corners: at this resolution all four corners appear relatively sharp with no obvious rounding, though the top-right corner of the die-cut border shows a very faint softening that warrants closer inspection. Surface: gloss appears intact with no visible creases, staining, or print defects on the photo image area; the red border shows no obvious chipping or peeling. Edges: the die-cut edge appears clean and well-defined all around, though the nature of die-cut stickers makes edge assessment inherently less penalizing than standard cards — a PSA 7–8 range is most likely, with upgrade to 8 possible if corners hold up under loupe.