1977 Topps Star Wars Stickers #39 Creature of Tatooine

Every grade of this card
| Grade | Live | Asking range | Last confirmed sale | Est. grade (ours) |
|---|---|---|---|---|
| Raw | 9 | $2.95 – $6.64 | $2.00 2026-09-21 | 7.0 |
| TAG ? | 0 | — | — | — |
| PSA 5 | 1 | — | — | — |
| PSA 6 | 1 | — | — | — |
| SGC 7 | 1 | $19.84 | — | — |
| PSA 8 | 0 | — | — | — |
| PSA 9 | 0 | — | — | — |
Confirmed sales — all grades
| Date | Grade | Price | Confidence |
|---|---|---|---|
| 2026-09-21 | Raw | $2.00 | HIGH |
| 2026-09-14 | Raw | $3.99 | HIGH |
Index grading notes

Centering: left border appears slightly wider than right (~55/45 L/R), top and bottom borders look close to 55/45 as well — centering is acceptable for NM range. Corners appear reasonably sharp with no obvious rounding visible at this resolution, though the scan does not permit close-up corner inspection. The red border and sticker surface appear clean with no visible chipping, staining, or obvious creases; gloss appears intact. The main limiting factors are the inability to confirm corner sharpness and edge wear at high magnification, and the typical vulnerability of 1977 stickers to surface and edge handling wear — range set conservatively between EX-MT (6) and NM-MT (8) with NM (7) as the most probable single grade.

Centering estimate: left/right borders appear approximately 60/40 favoring the left, top/bottom roughly 55/45 — within NM-MT territory on centering alone. The red film-strip border shows no obvious chipping or edge wear visible at this resolution. Corners appear reasonably sharp but the scan resolution makes precise corner assessment difficult; no obvious rounding is evident but subtle tipping cannot be ruled out. Surface gloss appears intact with no visible creases, staining, or print defects; the image is clean and well-registered. Given sticker set status (these often show adhesive handling wear on the reverse and edge lifting not visible from the front), the range is widened slightly downward, settling on NM as the most likely grade pending corner and back inspection.