1977 Wonder Bread Star Wars #6 Grand Moff Tarkin — TAG (grade unconfirmed)

Centering: the black border appears notably thinner on the left (~15%) versus right (~30%), and top border appears slightly wider than bottom — estimated left/right roughly 65/35 and top/bottom roughly 55/45, so centering is acceptable but left-heavy and would factor modestly. The bottom-left corner shows visible wear and slight rounding visible even at this resolution; the top-left corner also appears softened, while right corners are harder to assess due to perspective and shadow. Surface shows some scuffing or handling marks in the upper-left quadrant of the image area, and the black border shows minor nicks/chips consistent with age. No creases are clearly evident from this photo but cannot be ruled out given the shadow and angle. Wonder Bread cards were printed on thinner stock than Topps and are inherently more susceptible to wear; this example looks like honest mid-grade circulation wear placing it in the VG-EX to EX range, with the corner rounding and surface marks keeping the ceiling from going higher without a better photo.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border noticeably thinner than bottom (~60/40 T/B) — centering is imperfect but not severely off-center; no miscut visible. Corners: the visible corners show some rounding and softening, particularly the lower-left and upper-left, consistent with light to moderate handling wear — no sharp needle points. Surface: the image area shows some print quality typical of the Wonder Bread issue (these were notoriously lower-quality prints), and there appears to be light surface wear/scuffing visible especially in the upper portion of the card; gloss appears partially present but diminished. Edges: appear reasonably clean with no major nicks visible, though the toploader and angle limit full edge inspection. The lower-left area shows what may be a light surface mark or handling wear; without corner macro shots and a back inspection, the range remains wide — a strong EX (5) is the most likely outcome, with EX-MT (6) possible if corners are sharper than they appear and VG-EX (4) if the surface wear is more significant than visible here.