1977 OPC Star Wars #64 Governor of Imperial Outlands — Raw

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border noticeably wider than bottom (~60/40 T/B) — centering is off but within EX-MT range. Blue borders show no obvious chipping visible at this resolution, which is encouraging for an OPC issue. Corners appear to have light rounding — not razor sharp, consistent with an EX to EX-MT card; no corner is clearly blunted enough to drop below EX. Surface gloss appears reasonably intact with no visible creases, staining, or print defects beyond normal OPC print grain. Back is not visible so creases and surface wear cannot be fully ruled out; corner closeups are unavailable, widening the range accordingly.

Centering: left border appears narrower than right (approximately 70/30 left-right favoring right), top and bottom borders look more even at roughly 55/45 top-heavy — centering is off but not severely miscut. Blue borders show moderate chipping/wear particularly visible on the left and bottom edges, which is typical of OPC stock but still grade-relevant. Corners appear lightly to moderately rounded — no razor sharpness evident, suggesting EX to VG-EX range; no single corner looks severely blunted. Surface gloss appears partially intact with no obvious creases visible from this angle, but the coarser OPC stock and edge wear hold the grade down. Back and corner close-ups are unavailable, widening the range accordingly.

Centering estimate: left border appears narrower than right (~55-60% right bias), top border slightly wider than bottom, rough L/R ratio ~65/35 to 70/30 — borderline NM territory on centering alone. The blue border shows visible chipping/wear along the left and bottom edges, consistent with typical OPC blue-border fragility. Corners appear lightly to moderately rounded — no sharp points evident, suggesting corner wear in the EX to VG-EX range. Surface gloss appears moderate with some dulling visible, no obvious creases detected but the scan resolution limits crease detection with certainty. Overall condition reads EX (5) as the most likely grade, with VG-EX (4) possible if corner rounding is worse than it appears, and EX-MT (6) possible if the blue border chips are less severe than they read in photo.