1977 OPC Star Wars #64 Governor of Imperial Outlands

Centering estimate: left blue border appears noticeably wider than right (~60-65% left, 35-40% right L/R); top border slightly wider than bottom (~55/45 T/B), so centering is off but not severely so. The blue border shows visible chipping/wear along the left and bottom edges, which is characteristic of OPC stock. Corners appear to have light-to-moderate rounding — no sharp points visible at any corner, consistent with an EX to VG-EX range. Surface gloss appears partially intact with no obvious creases visible in this photo, but some light gloss loss is apparent. Edge wear on the blue border is the primary grade-limiting factor here; without a back view or corner macro, the range must stay wide.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border appears noticeably wider than bottom (~65/35 T/B), which is acceptable for the grade range assessed. Blue borders show moderate chipping and wear along all four edges, particularly noticeable along the bottom and right edges - characteristic of OPC stock which tends to be softer than Topps. Corners appear lightly to moderately rounded, consistent with a 5 EX grade; no corner is sharp enough to suggest NM range, but none shows heavy blunting either. Surface gloss appears partially intact with some loss visible across the image area; no creases are detected in this photo though the image resolution doesn't allow definitive ruling out of light surface lines. Overall condition reads EX (5) with a reasonable chance of EX-MT (6) if corners and surface hold up under closer inspection.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border appears slightly wider than bottom (~55/45 T/B) — centering is acceptable for a PSA 6-7 range. The blue border shows no obvious chipping at the edges visible at this resolution, though OPC stock can be harder to read. Corners appear to have very light rounding at two or three tips, consistent with light handling wear — no sharp razor corners visible, placing this below NM-MT territory. Surface gloss appears reasonably intact with no obvious creases or staining visible; the image reproduction on the card looks clean. Without corner macro shots or a back view, the range is widened; a crease or heavier corner wear not visible at this resolution could push the grade down toward 5.