1977 Topps Star Wars Stickers #1 Luke Skywalker — Raw

Centering on the sticker die-cut itself appears reasonably balanced left-to-right (approximately 55/45) and top-to-bottom (approximately 60/40) within the black background card, though the case angle makes precise measurement difficult. The green die-cut border looks intact with no obvious chipping or peeling visible, and the yellow name banner appears clean and bright. Corner assessment is limited by the holder and photo angle, but no gross rounding or creasing is evident; at least two corners appear sharp to slightly soft. Surface gloss appears present but minor glare from the case obscures a full assessment of print quality and any surface wear — a back inspection and corner closeups would be needed to confidently separate a grade 6 from an 8.

Centering on the sticker face within the card appears roughly 60/40 left-right and 55/45 top-bottom — acceptable for this notoriously wandering issue. The upper-left corner of the card shows visible wear and what appears to be a small bend or ding; the upper-right corner also shows light rounding and surface stress. The card's black background shows some scuffing or surface soil particularly toward the top edge, and the sticker layer itself has minor gloss loss. No obvious hard creases are visible on the face, but the top-left area cannot be ruled out for a soft crease without a closer inspection; the back is unseen. Overall condition suggests a VG-EX (4) range, with EX (5) possible if corner wear is less severe than it appears, and VG (3) if a crease hides in the troubled upper-left zone.

Centering on the backing card appears roughly 60/40 left-to-right and 55/45 top-to-bottom, which is acceptable, but the sticker die-cut itself sits slightly left of center on the backing. Corner examination shows the backing card's corners appear softly rounded — upper-left and lower-right corners show the most visible wear/rounding, consistent with a VG-EX range. The surface of the sticker itself shows some light scuffing and minor gloss loss, particularly visible on the face area, with no obvious hard creases but possible light handling lines. Edges of the backing card show moderate wear; without a back-of-card view, hidden creases or staining cannot be ruled out, which keeps the ceiling at a 5 EX.

Centering: the green die-cut border appears reasonably centered left-to-right (approximately 55/45), with slightly more dark background visible at top than bottom (roughly 60/40 T/B) — no dramatic miscut detected. Corners on the sticker die-cut edge show mild rounding, particularly visible at the lower-left and lower-right, consistent with EX to EX-MT range. Surface appears intact with reasonable gloss retention and no obvious creases visible in this image, though the sticker surface texture makes gloss assessment difficult. The card-within-card black border area at top shows some minor edge wear; back adhesion history cannot be assessed from front only, which is a meaningful unknown for sticker grades.

Centering: the die-cut sticker shape sits slightly left-of-center on the card stock, with the left black border measuring roughly 3–4mm and the right border roughly 5–6mm; top and bottom appear near-even at approximately 60/40 — not a severe centering issue. Surface gloss appears intact with no obvious creases or staining visible. Corners on the black card stock are difficult to fully assess at this resolution but show no obvious rounding or fraying; they read as mildly worn at best, consistent with a 6–7 range. The sticker face itself looks clean with good color saturation, but the back and corner micro-wear cannot be confirmed from this single front image, widening the range. The card appears unaffected by peeling, lifting, or adhesive issues common to this sticker issue.

Centering: the green die-cut border appears slightly left-heavy, with the right side showing marginally less green than the left — estimating approximately 60/40 left-to-right; top-to-bottom appears close to 55/45, acceptable. Corners: all four corners show visible rounding under inspection, none appear sharp — consistent with EX to VG-EX range; no single corner appears severely blunted. Surface: the sticker face shows moderate gloss loss and what appears to be light handling wear or scuffing across the image area, particularly visible on the lower portion of the portrait; no obvious crease is visible but surface texture suggests some wear. Edges: the die-cut edge appears intact without significant chipping or tears, though the cut profile is slightly irregular in places, which is normal for this issue. Back not visible, and sticker adhesive condition unknown — these factors could push the grade lower if the back shows lifting or residue.

Centering: the die-cut sticker within the card background appears reasonably centered left-to-right (roughly 55/45), but the card itself shows the top black border as a thin sliver (~3mm) versus a more generous bottom border (~6mm), suggesting approximately 70/30 top-to-bottom — acceptable for this issue. Corners on the card stock appear rounded at multiple points, particularly visible at the lower corners, consistent with handling wear placing this in the VG-EX to EX range. Surface shows some light scuffing or wear on the green sticker border (notably upper-left area of the die-cut) and the sticker surface itself shows some minor loss of gloss. The sticker does not appear to have been peeled, which is critical for this issue; no visible creases on the sticker face, but the card backing shows edge and corner wear that limits the ceiling to EX (5) at best, with VG-EX (4) being the most probable grade.

Centering on the sticker die-cut itself appears left-heavy — the green border is notably thinner on the right side vs. left, estimating roughly 60/40 L/R; top/bottom appears more balanced at approximately 55/45. The sticker sits on its backing card which shows a starfield background and appears reasonably centered within that outer card. Corner assessment is limited by the medium-distance shot but the lower corners of the sticker show slight softening/rounding consistent with EX to EX-MT range; upper corners appear sharper. Surface gloss appears intact with no obvious creases or staining visible, and the green border shows no significant chipping. The image does not provide close-up corner detail, widening the range; a crease on the backing card or sticker cannot be fully ruled out.

Centering on this die-cut sticker appears left-heavy with the green border noticeably wider on the left (~60%) than the right (~40%), and top border slightly heavier than bottom — roughly 60/40 L/R and 55/45 T/B, acceptable for the sticker format but worth noting. The die-cut edge appears intact with no visible peeling or paper loss. Corners on the yellow name banner and the green border frame look slightly soft but not heavily rounded — consistent with a grade in the EX to NM range, though the angle and ambient glare prevent confident corner assessment. Surface gloss appears moderate with no obvious creases visible, but the photo resolution and angle obscure fine surface wear, sticker separation issues (common on this issue), and edge condition; the range is widened accordingly to reflect genuine uncertainty.

Centering on the card back/frame: the green die-cut sticker sits reasonably centered on the black card stock; left border appears slightly wider than right (~55/45 left-right), top and bottom appear roughly 60/40 top-heavy — centering is acceptable but not tight. The sticker surface itself shows no visible creases under this lighting. Corner wear on the card (black stock) is the main concern: the lower-left and lower-right corners of the card stock show slight rounding and what appears to be light wear, consistent with an EX (5) grade; upper corners look marginally sharper. The sticker's green border shows no obvious chipping or edge wear visible at this resolution, and gloss appears present but not pristine. Back cannot be assessed; hidden corner and edge detail may push the grade lower if wear is more significant than visible here.

Centering estimate: the green die-cut border appears roughly 55/45 left-to-right and approximately 60/40 top-to-bottom, so centering alone is acceptable for mid-grade. Surface shows visible wear — there is a noticeable crease or fold line running diagonally across the lower-center of the sticker (visible below the chin/chest area), which is a significant grade-limiting defect pushing the card toward VG-EX or below. Corners appear slightly rounded rather than sharp, consistent with a 4-5 range, but the crease is the primary concern. Gloss appears partially intact though the sleeve glare obscures full surface assessment; no obvious staining or writing detected. The combination of the surface crease and softened corners most likely lands this card at PSA 4 (VG-EX), with a 3 possible if the crease proves deeper on inspection, and a 5 ceiling only if what appears to be a crease is surface scuffing rather than a fold.

Centering on the die-cut sticker appears reasonably well-centered within its green border frame — left/right ratio estimated approximately 55/45, top/bottom approximately 60/40, which is acceptable for this issue. The green die-cut border shows no immediately obvious chipping or heavy edge wear, though the plastic case limits corner inspection; corners appear to have modest but present rounding suggesting light use, consistent with EX-MT to NM range. Surface gloss appears intact with no visible creases, staining, or print defects under the case glare; the image is sharp and colors are vibrant. Back is not visible and corner detail is obscured by the holder, which prevents confident differentiation between a 6 and 7 — a closer corner inspection outside the case would be needed to refine further.

Centering estimate: left/right borders appear approximately 55/45 and top/bottom approximately 60/40 — acceptable for the grade range. The green die-cut border shows no obvious chipping or significant edge wear visible at this resolution, which is encouraging for a 46-year-old sticker. Corners appear reasonably sharp with no obvious rounding visible, though the case and photo angle limit close-up corner inspection. Surface gloss appears intact with no obvious creases, scratches, or print defects noted; one small dark speck is visible near the upper right area of the card but could be a print artifact rather than surface damage. The sticker appears to have been peeled or at least separated from its backing at some point — this is the key unknown, as sticker adhesive residue on the reverse or any paper loss from peeling would significantly cap the grade; that information is entirely hidden by the case and the single-photo presentation.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border noticeably wider than bottom (~65/35 T/B), so centering is acceptable but not tight. Blue borders show visible chipping and wear along all four edges, which is characteristic of this issue but here is pronounced enough to cost grade. Corners: all four show rounding, most notably the bottom-left and top-right, consistent with a VG-EX (4) to EX (5) range. Surface gloss appears partially intact with some dulling visible on the image area; no creases are evident from this angle but the photo angle and lighting obscure the lower-left corner and edges fully, preventing a confident read on whether a crease is present. Given the corner rounding, edge chipping on the blue border, and moderate surface wear, a PSA 4 (VG-EX) is the most likely outcome, with 5 possible if corners are slightly better than they appear and no hidden creases exist.