1977 Topps Star Wars Stickers #12 Han and Chewbacca — Raw

Centering on the card stock (not the die-cut sticker itself): left border appears slightly wider than right, roughly 55/45 L/R; top border noticeably wider than bottom, approximately 60/40 T/B — centering is acceptable for a mid-grade. The die-cut sticker sits well within the card backing with no obvious miscut. Corners of the card stock show light wear with very slight rounding visible on at least two corners, consistent with EX-MT to NM range. Surface gloss appears reasonably intact with no visible creases, though the sleeve glare obscures the upper portion of the card surface and prevents a definitive surface assessment. Blue card stock edges show no dramatic chipping visible at this resolution, but edge condition cannot be fully confirmed; the range is widened accordingly.

Centering on the sticker itself appears roughly 60/40 left-right and 55/45 top-bottom within its die-cut frame, which is acceptable for this issue. The seller note 'READ' in the title suggests a disclosed flaw, and the bottom note confirms 'corner wear,' which is consistent with what the photo suggests — at least light-to-moderate rounding on the lower corners, though corner closeups are not available. Surface gloss appears moderate with some age-related dulling visible; no obvious creases are detected from this angle, but the image resolution does not allow confident ruling out of light surface marks. The die-cut edges look intact without significant chipping to the red border, placing this solidly in the EX range pending back inspection and corner closeup confirmation.

Centering estimate: the die-cut red border appears moderately off — left red margin is noticeably wider than the right (~65/35 left-right), top and bottom appear closer to 55/45 — centering is a concern but not miscut territory. Corner examination through the sleeve shows visible rounding on at least two corners (lower-left clearly softened, upper-right also showing wear), consistent with a VG grade. Surface gloss appears reduced with some scuffing or light soiling visible on the sticker surface, and there is noticeable edge/border wear along the bottom. No visible crease from this angle, but the sleeve obscures fine detail on edges and corners, widening the range downward; seller's 'VG' self-description aligns with what is visible here, landing this squarely in the PSA 3 range with potential to grade as low as 2 if hidden creases or staining are present.

Centering: the die-cut sticker shape sits within the card frame; left border appears slightly wider than right (~55/45 L/R), top border noticeably tighter than bottom (~60/40 T/B) — centering is acceptable, no OC concern. Corners on the sticker itself show some rounding at the lower-left and lower-right die-cut points, consistent with EX to EX-MT wear; upper corners are harder to judge at this resolution. Surface appears to retain reasonable gloss with no visible creases, but there is noticeable wear/handling evident in the image texture — the sticker face shows subtle scuffing consistent with a 5 EX. Edges of the card backing look slightly rough but within normal vintage parameters; the die-cut perimeter appears intact with no tears or lifts visible, though fine detail on the sticker border edges is slightly obscured by the image angle.

Centering on the backing card appears roughly 60/40 left-right and 55/45 top-bottom, which is acceptable, but sticker centering within the die-cut surround is what matters most here and the sticker sits slightly left-of-center. A visible horizontal crease or fold line runs across the mid-section of the card (approximately chest height on the figures), which is the most significant defect — this alone caps the grade in the VG-EX to EX range at best. Corners on the backing card show moderate rounding and the surface gloss appears diminished with some scuffing visible under the image. The sticker itself appears intact without tears or paper loss, but the crease and corner wear together push this into the VG-EX (4) neighborhood, with EX (5) as the optimistic ceiling if the crease is shallower than it appears and VG (3) a real possibility if the crease has depth on reverse.

Centering on the outer card stock reads approximately 55/45 left-to-right and 50/50 top-to-bottom — acceptable for this issue. The die-cut sticker itself sits reasonably centered within the card. Surface shows moderate gloss retention with no obvious creases visible, but the image compression makes fine surface evaluation difficult. Corners on the card stock appear lightly rounded — consistent with an EX range — and the red sticker border shows no obvious chipping or heavy wear, though the bottom-left area of the sticker border looks slightly worn. Back cannot be assessed, and no corner closeups are available, so the range is widened to account for hidden wear; a crease or heavier corner rounding on the reverse could pull this into VG-EX (4) territory.

Centering on the sticker die-cut shape appears reasonably balanced left-to-right (roughly 55/45) and top-to-bottom (roughly 60/40), which is acceptable for this issue. The red die-cut border shows no obvious chipping or major edge wear visible at this resolution, and the yellow caption banner is clean with no visible staining. Corners on the sticker itself are difficult to fully assess due to the die-cut rounded shape typical of this set, but no severe rounding or creasing is apparent; the surface gloss looks intact with no obvious scratches or print defects. Back condition, edge texture, and fine corner detail cannot be confirmed from this single front photo, so the range is widened accordingly — a strong example could reach 7, while hidden back wear or corner rounding could push it toward 5.

Centering on the sticker itself within the card backing appears left-heavy, roughly 60/40 L-R and 55/45 T-B, which is acceptable for this notoriously off-center issue. The red die-cut border shows visible chipping and wear along the upper-left and upper-right edges, consistent with significant handling. All four corners show rounding — the upper corners appear more worn than the lower pair, suggesting moderate-to-heavy corner degradation typical of a VG range card. Surface gloss appears substantially reduced with some clouding or surface scuffing visible across the sticker face, and there may be a light crease or fold stress in the lower-left quadrant, though the image resolution prevents a definitive call. Overall condition points squarely to a PSA 3 VG, with a generous ceiling of 4 VG-EX if the surface and back are cleaner than the front suggests.

Centering on the sticker itself appears left-heavy with the die-cut red border noticeably narrower on the left side than the right — estimating roughly 60/40 left-to-right; top-to-bottom looks close to 55/45. Corners on the sticker's red border appear reasonably intact with no obvious heavy rounding visible at this resolution, though slight softening is possible on the lower-left corner. Surface shows no visible creases or staining and the photo image appears clean and glossy. The die-cut edge of this sticker type is difficult to fully assess for chipping or peel damage from a single front photo, and the back peel condition is unknown — these factors push uncertainty wide enough to span EX through NM.

Centering on the sticker itself appears reasonably balanced left/right (~55/45) and top/bottom (~55/45), within NM-MT range for centering alone. The die-cut red border looks intact with no visible chipping or peeling along the edges. Corners on the die-cut perimeter are difficult to assess precisely at this resolution but appear to show light to moderate rounding — consistent with EX-MT to NM range. Surface gloss appears largely intact with no obvious creases or staining visible, though the photo resolution limits confident corner and edge micro-assessment. A grade of 6 EX-MT is the most likely outcome, with upside to 7 if corners prove sharper on inspection and downside to 5 EX if light rounding is more pronounced than the photo reveals.

Centering on the sticker die-cut shape appears roughly 60/40 left-to-right and 65/35 top-to-bottom within the card stock borders, acceptable for the grade range. The yellow title banner and orange die-cut border show no visible creasing. Surface gloss appears moderate with some fading or dulling on the C-3PO image — consistent with age and light handling but no obvious scratches or staining visible. Corner assessment is limited because the die-cut shape obscures the card stock corners somewhat; the card stock corners appear to have light rounding consistent with a PSA 5 EX, and no hard creases are visible. Back condition and sticker peel status (whether the sticker has been peeled or remains intact on backing) cannot be assessed from this photo and could significantly impact grade — intact backing stickers command a premium and PSA grades them higher.

Centering estimate: left border appears slightly wider than right (~55/45 L/R), top border slightly wider than bottom (~55/45 T/B) — centering is acceptable and not a primary grade driver here. More concerning are visible surface scratches/scuffs across the image area (particularly on C-3PO's head and the dark background), which suggest gloss loss and light surface wear; these are the dominant grade killers. Corners are obscured by the holder but appear to show light rounding on at least two corners based on visible edges. The red border shows some wear and minor chipping consistent with a PSA 5 EX range card; no creases are definitively visible but the surface abrasion likely pushes this below NM territory. Cannot assess back, corners in detail, or confirm printer nationality from this photo.