1977 Topps Star Wars Stickers #12 Han and Chewbacca

Centering: left/right borders appear approximately 60/40 favoring left; top/bottom roughly 55/45 — acceptable for sticker but not tight. The die-cut red border shows no obvious nicks or tears along the scalloped edges. Corners on the underlying card stock are difficult to assess precisely due to the die-cut format, but the lower corners show subtle softening consistent with a PSA 5 EX range. Surface gloss appears moderate with some light wear or handling haze visible, particularly in the lower half; no visible creases. The die-cut sticker peel status cannot be confirmed from this image, which is a key factor PSA weighs heavily — an unpeeled sticker grades higher, but this cannot be determined here, widening the range downward.

Centering estimate: the die-cut red border appears moderately well-centered left/right (roughly 55/45 L/R), but the top border is noticeably thinner than the bottom, suggesting approximately 70/30 T/B — acceptable for the grade range but not tight. Corners: all four corners show visible rounding or softening; no sharp points evident on any corner, consistent with a VG-EX or lower grade. Surface: there is visible soiling/scuffing on the upper-left quadrant of the card face and some general surface grime or print wear across the blue background; gloss appears partially diminished. Edges: the card edges look intact without obvious tears but show light wear consistent with age and handling; no creases are definitively visible in this image though surface stress cannot be ruled out, and the photo angle limits full assessment of the back.

Centering: left/right borders appear approximately 55/45 to 60/40 favoring left; top/bottom appears roughly 60/40 favoring bottom — centering is acceptable and not a major grade killer. The die-cut red border appears largely intact with no obvious chipping or fraying visible along the edges, though the sleeve glare obscures the lower-left and bottom edge detail. Corners appear to show mild rounding on at least one or two corners — not crisp enough for NM-MT but not heavily worn either, suggesting EX-MT to NM range. Surface gloss appears reasonable with no visible creases or major print defects, though the penny sleeve reflection makes a definitive surface call impossible. Grade is estimated at 6 EX-MT as the most likely point, with range widened due to the obscuring sleeve and lack of corner close-ups.

Centering (within the backing card): left/right borders appear roughly 55/45 and top/bottom roughly 60/40 — acceptable for the set. The die-cut sticker itself sits centered on its backing. Corners on the die-cut outline show visible rounding at two or three points, particularly the lower left, consistent with light to moderate handling wear. Surface shows some gloss loss and a few minor scuffs visible in the mid-section of the sticker; no obvious creases are detectable from this angle, though the back cannot be assessed. Edges of the backing card appear slightly worn with minor fraying. Overall condition points to EX range (5), with VG-EX (4) possible if corner rounding is more pronounced than the photo reveals, and EX-MT (6) possible if the gloss loss is less severe in hand.