1977 Topps Star Wars Stickers #15 See-Threepio

Centering on the card (not the die-cut sticker within it): left/right borders appear roughly 50/50 and top/bottom roughly 55/45 — acceptable for this issue. The die-cut sticker itself sits well within the card mount. Surface gloss appears intact with no visible creases or staining; the red border shows no obvious chipping. Corners of the outer card are difficult to assess at this resolution but appear reasonably sharp with at most light wear at one or two tips, consistent with a NM range. The single-photo, moderate-distance shot prevents confident corner and edge inspection, widening the range; a closer corner shot could easily push this toward 8 or pull it to 6.

Centering on the card backing (not the sticker itself): left border appears noticeably narrower than right (~60/40 left-right), top and bottom borders appear roughly even (~55/45); not severely miscut but off-center. The top-left corner of the card backing shows visible wear/fraying and appears slightly rounded or dinged; the top-right corner also shows some wear. The blue card background shows the characteristic chipping/wear along the upper edge typical of this issue. Surface gloss appears reduced with some visible scuffing or handling wear across the sticker face; the sticker itself shows some color loss or print wear consistent with age and handling. No obvious creases are visible from this angle but the surface wear and corner condition together cap this estimate in the VG-EX to EX range, with PSA 4 as the most likely outcome.

Centering on the backing card: left border appears slightly wider than right (~55/45 L/R), top border marginally wider than bottom (~55/45 T/B) — centering is quite respectable for this issue. The die-cut sticker itself sits well within the backing card with the full red border visible on all sides. Corners on the backing card appear fairly sharp with minimal rounding visible at this resolution; the sticker's own die-cut edges look clean without obvious fraying or lifting. Surface gloss appears intact with no visible creases, staining, or print defects on the sticker image itself; the C-3PO image is sharp and well-registered. Main uncertainty is corner and edge condition at higher magnification — no macro corner shots provided — which could move the grade a full point in either direction; a PSA 7 NM seems most likely but NM-MT 8 is plausible if corners hold up under close inspection.

Centering: the red die-cut border appears reasonably balanced left/right (~55/45) and slightly tight at top vs. bottom (~60/40 top-heavy), within acceptable range for this issue. Corners: all four corners appear intact with no obvious rounding or fraying visible at this resolution, suggesting at least EX condition. Surface: the sticker surface shows good color saturation and gloss; no visible creases, staining, or print defects are apparent, though the case prevents a definitive edge and corner inspection at high magnification. The copyright line shows two asterisks consistent with O-Pee-Chee printing but this cannot be confirmed from the front alone; grade estimate of 6 EX-MT reflects solid surface and centering tempered by the inability to fully assess corner tips and edges through the case.