1977 Topps Star Wars Stickers #20 R2-D2 and C-3PO — Raw

Centering estimate: left/right borders appear approximately 70/30 favoring left, top/bottom roughly 60/40 favoring top — centering is off but not catastrophically so for this issue. The upper-left and upper-right corners show visible rounding and wear; lower corners appear slightly better but still show softening. The black outer border shows chipping and edge wear consistent with handling, and the red sticker border has some surface scuffing visible. Surface gloss appears diminished with light wear across the image area; no obvious creases are detectable from this scan, though the image resolution limits a definitive call. The card would likely land in the VG-EX (4) to EX (5) range, with corner and edge wear being the primary grade-limiting factors.

Centering estimate: left border appears slightly narrower than right (~55/45 L/R), top border slightly narrower than bottom (~55/45 T/B) — centering is acceptable in the NM-EX range. The red border shows minor chipping or wear along the edges, most notably at the corners where some rounding and light fraying is visible, consistent with a grade in the EX-MT to NM range. Surface gloss appears reasonably intact with no obvious creases, staining, or print defects visible at this resolution. Corner wear is the primary grade limiter — the corners appear slightly soft rather than sharp, which keeps this card out of the 8+ range; a closer inspection of corners and back condition would be needed to narrow the range further.

Centering estimate: left/right borders appear approximately 60/40 favoring the left, top/bottom roughly 65/35 favoring the top — within NM-MT range horizontally but slightly pushed top-heavy. Corners appear to have light rounding on at least the bottom-left and bottom-right corners visible in the image, consistent with EX-MT to NM range wear. Surface shows no obvious creases from this angle and the red border appears intact without significant chipping or scuffing. The plastic holder introduces some glare in the upper quadrant limiting full surface assessment; a back inspection and corner macro would be needed to tighten this range.

Centering estimate: left red border appears slightly wider than right (~55/45 L/R), top border slightly tighter than bottom (~55/45 T/B) — centering is acceptable for NM-MT range. Corners appear reasonably sharp at this resolution but the scan doesn't allow close corner inspection; no obvious rounding visible on any corner, suggesting at minimum EX-MT condition. The red border shows no obvious chipping or significant wear, and the surface appears to retain decent gloss with no visible creases or staining. The sticker peel/back condition cannot be assessed from this front-only image, and corner sharpness cannot be confirmed at pixel level, so the range is widened accordingly — a grade of 6 EX-MT is the most likely outcome, with upside to 7 NM if corners prove sharper under closer examination.