1977 Topps Star Wars Stickers #20 R2-D2 and C-3PO

Centering estimate: left border appears slightly wider than right (roughly 55/45 L/R), top border appears slightly wider than bottom (roughly 55/45 T/B) — centering is reasonably tight and not a major deduction. Corners appear to show light rounding or soft tips, particularly visible on the lower corners, consistent with light handling wear placing this in the EX-MT to NM range. Surface shows no obvious creases visible from this angle, and the image/gloss appears intact with reasonable color saturation. The sleeve introduces some glare along the left and bottom edges that partially obscures corner sharpness; a closer corner inspection could push this up to a 7 or down to a 5 depending on what is hidden.

Centering estimate: left red border appears roughly 10–12% wider than right, top border slightly wider than bottom — approximate L/R ~55/45 and T/B ~55/45, within NM-MT tolerances. The red border shows no obvious chipping or fraying along the edges at this resolution, which is a positive sign for this issue. Corners appear reasonably sharp but slight softening is possible on one or two corners — difficult to confirm definitively without a macro shot. Surface gloss appears intact with no obvious creases, staining, or print defects visible; the image is clean and well-focused. The range is widened modestly because sticker die-cut edge condition and precise corner sharpness cannot be fully assessed without closer inspection, particularly of the die-cut perimeter.