1977 Topps Star Wars Stickers #4 Chewbacca the Wookiee — Raw

The upper-left corner shows clear paper loss or tearing — a portion of the card stock is missing or severely damaged, which alone pushes this toward the PR-FR/GOOD range. Centering within the sticker image appears reasonable (approximately 55/45 L/R, 60/40 T/B) but the die-cut edge at upper-left is visibly compromised with what appears to be a tear or chunk missing. The remaining visible corners show moderate-to-heavy rounding consistent with a GOOD (2) grade. Surface shows general wear and soiling, with gloss loss evident throughout; the sticker itself appears to have been peeled or partially lifted at some point given the edge condition. The damage at upper-left is severe enough that a PR (1) is possible depending on examiner judgment, but the card retains enough structural integrity to likely land at GOOD (2).

Centering: the green die-cut sticker sits reasonably well on the backing card; left/right borders appear roughly 60/40 favoring the left, top/bottom approximately 55/45 — acceptable for this issue. The green sticker border itself appears clean and bright with no visible chipping or peeling at the edges. Corners on the sticker die-cut and the backing card both show light rounding but no heavy wear or creasing visible; the sticker face gloss appears largely intact with no obvious staining or print defects. Surface looks solid with good color saturation on Chewie's portrait. Key unknowns from a single front photo include the condition of the backing card edges and corners at full resolution, any back-surface issues, and whether any fine scuffing exists on the sticker face — these prevent a tighter range.

Centering on the green sticker border appears reasonably balanced left/right (~55/45) and top/bottom (~60/40), so no severe centering penalty. The die-cut edge appears intact and cleanly cut with no visible nicks or tears along the sticker outline. Surface gloss looks present and reasonably intact with no obvious creasing visible, though the photo's moderate resolution makes it difficult to fully assess fine surface wear or print defects. Corners on the sticker's outer border look slightly soft but not heavily rounded, suggesting light handling wear consistent with EX-MT to NM range; the back and corner close-ups are unavailable so the range is widened accordingly.

Centering: the green die-cut border appears slightly left-heavy and top-heavy — estimated left/right roughly 55/45 and top/bottom roughly 60/40, acceptable but not tight. Corners: the upper-left and upper-right corners show visible rounding/softening; lower corners are harder to assess but appear similarly worn — consistent with EX to VG-EX range. Surface: gloss appears moderate with some light wear; no creases are visible in the photo, but the card has clearly seen handling. The die-cut edge appears intact with no major chips or tears, though the card back and fine corner detail cannot be fully confirmed from this single front image.

Centering on the die-cut sticker: the green border appears slightly wider on the left (~55%) versus right (~45%) and top (~55%) versus bottom (~45%), which is acceptable for this issue. Corners are obscured by case glare but show no obvious rounding or fraying visible through the plastic. Surface gloss appears intact with no readily visible creases, but the heavy glare across the upper-left quadrant conceals a meaningful portion of the sticker surface and prevents confident surface assessment. The case itself is not a PSA slab, so the card is raw and gradable in principle, but the single front-only photo through a glare-prone hard case prevents reliable corner and surface evaluation — the true grade could swing meaningfully in either direction pending a back inspection and corner examination outside the holder.

Centering: The green sticker border appears slightly left-heavy and top-heavy — estimating approximately 55/45 left-to-right and 60/40 top-to-bottom, which is acceptable for this issue. Corners: The plastic case obscures all four corners almost completely, preventing a reliable corner assessment — this alone forces a wide range. Surface: Some visible fine scratches or scuffs on the card surface (or possibly on the case overlay) are noted in the upper portion of the image; gloss appears moderate with some reduction, consistent with light handling. Edges: The die-cut edge profile appears intact with no obvious chips or tears visible, but the case prevents a clean read of the perimeter. Given the surface wear hints and inability to confirm corner condition, EX (5) is the most likely grade, but a clean-cornered example could reach NM (7) while a corner-worn copy could fall to VG-EX (4).

Centering on the die-cut sticker appears roughly 60/40 left-to-right and 55/45 top-to-bottom within the card stock frame — acceptable for this issue. Corners show moderate rounding consistent with a VG-EX to EX range; none are sharp but none are severely rounded either. The green die-cut border shows some minor surface soiling and slight edge wear but no obvious creases are visible from this single front photo — the seller's VG-EX self-assessment aligns with what is visible. Gloss appears partially intact with some dulling; back and corner closeups are unavailable, so the range is widened to account for hidden wear.

Centering on the outer card stock: left border appears slightly wider than right (~55/45 L/R), top and bottom borders appear roughly even (~55/45 T/B) — centering is acceptable for a 7 ceiling. The die-cut green sticker border itself shows no obvious chipping or peeling at the edges visible in this photo. Corners on the outer card appear to have mild rounding consistent with light handling — no sharp points visible at this resolution, suggesting EX-MT to NM range. Surface gloss on the sticker image appears intact with no obvious creases, staining, or print defects noted; the yellow caption banner looks clean. The single seller photo lacks corner close-ups and back visibility, so the range is kept wide to account for hidden wear on corners or edges.

Centering on the sticker itself appears roughly 60/40 left-to-right and 55/45 top-to-bottom within the die-cut border — acceptable for the issue. The green die-cut border shows no obvious chipping or heavy wear at the visible edges, but the die-cut perimeter is the hardest area to assess at this resolution. Corners of the sticker die-cut look slightly soft, consistent with an EX-MT to NM range, with no sharp points clearly visible under the arch; one or two corners may show light rounding. Surface gloss appears decent with no obvious creases or staining, but the sticker stock on these is prone to curl and subtle surface wear that this photo cannot fully reveal. The back is unseen, and corner sharpness on die-cut stickers is difficult to confirm without a higher-resolution or closer shot, so the range is widened accordingly.

Centering on the sticker die-cut shape appears roughly 60/40 left-to-right and approximately 65/35 top-to-bottom, which is acceptable for the grade range. The green border shows no obvious chipping but does display some minor wear dimpling along the right edge. Corners on the sticker itself are somewhat soft and show light rounding — consistent with an EX (5) to EX-MT (6) specimen, though the die-cut nature of stickers makes precise corner assessment harder than on base cards. Surface gloss appears moderately intact with no obvious creases visible, but the scan resolution prevents definitive assessment of fine print defects, edge wear, or subtle surface scratches that PSA graders would catch under loupe; back condition (adhesive state) is also unknown and can further affect grade.