1977 Topps Star Wars Stickers #4 Chewbacca the Wookiee

Centering on the sticker die-cut shape appears roughly 60/40 left-to-right and approximately 65/35 top-to-bottom, which is acceptable for the grade range. The green border shows no obvious chipping but does display some minor wear dimpling along the right edge. Corners on the sticker itself are somewhat soft and show light rounding — consistent with an EX (5) to EX-MT (6) specimen, though the die-cut nature of stickers makes precise corner assessment harder than on base cards. Surface gloss appears moderately intact with no obvious creases visible, but the scan resolution prevents definitive assessment of fine print defects, edge wear, or subtle surface scratches that PSA graders would catch under loupe; back condition (adhesive state) is also unknown and can further affect grade.

Centering on the sticker itself appears roughly 60/40 left-to-right and 55/45 top-to-bottom within the die-cut border — acceptable for the issue. The green die-cut border shows no obvious chipping or heavy wear at the visible edges, but the die-cut perimeter is the hardest area to assess at this resolution. Corners of the sticker die-cut look slightly soft, consistent with an EX-MT to NM range, with no sharp points clearly visible under the arch; one or two corners may show light rounding. Surface gloss appears decent with no obvious creases or staining, but the sticker stock on these is prone to curl and subtle surface wear that this photo cannot fully reveal. The back is unseen, and corner sharpness on die-cut stickers is difficult to confirm without a higher-resolution or closer shot, so the range is widened accordingly.

Centering on the outer card stock: left border appears slightly wider than right (~55/45 L/R), top and bottom borders appear roughly even (~55/45 T/B) — centering is acceptable for a 7 ceiling. The die-cut green sticker border itself shows no obvious chipping or peeling at the edges visible in this photo. Corners on the outer card appear to have mild rounding consistent with light handling — no sharp points visible at this resolution, suggesting EX-MT to NM range. Surface gloss on the sticker image appears intact with no obvious creases, staining, or print defects noted; the yellow caption banner looks clean. The single seller photo lacks corner close-ups and back visibility, so the range is kept wide to account for hidden wear on corners or edges.

Centering on the die-cut sticker appears roughly 60/40 left-to-right and 55/45 top-to-bottom within the card stock frame — acceptable for this issue. Corners show moderate rounding consistent with a VG-EX to EX range; none are sharp but none are severely rounded either. The green die-cut border shows some minor surface soiling and slight edge wear but no obvious creases are visible from this single front photo — the seller's VG-EX self-assessment aligns with what is visible. Gloss appears partially intact with some dulling; back and corner closeups are unavailable, so the range is widened to account for hidden wear.