1977 Topps Star Wars Stickers #5 See-Threepio

Centering (left/right): the orange die-cut border appears slightly wider on the left than the right, estimating roughly 55/45 L/R — acceptable. Top/bottom: the sticker image rides a touch high within the card frame, approximately 60/40 T/B — within NM-MT tolerance. Surface gloss appears intact with no obvious creases or staining visible; the C-3PO image shows good color saturation. Corners on the die-cut sticker itself look reasonably sharp but the scan resolution limits close inspection — the lower-left corner of the card mount shows possible minor softening. The key unknowns from a single front-only scan are the back condition, any hidden surface scratches, and precise corner sharpness; stickers from this series also commonly suffer adhesive residue or paper loss on the back which would cap the grade, hence the range is widened to 6–8 with a point estimate of 7 (NM).

Centering estimate: left border appears slightly wider than right (~55/45 L/R acceptable), top border appears tighter than bottom (~60/40 T/B), so centering itself is not a severe issue. Corners show visible rounding on all accessible corners, most notably the upper-left and lower-left, consistent with VG-range wear. Surface shows multiple handling scratches and scuffs across the sticker face — particularly noticeable in the upper portion of the C-3PO image — and general gloss loss. The card back and edges cannot be evaluated from this photo. The seller's title flags a condition issue ('READ CONDITION'), and the visible surface wear and rounded corners support a grade in the VG to VG-EX range (3–4); the scuffing and scratching on the surface push the estimate toward the lower end of that range.

Centering: the die-cut sticker sits on a backer card; the sticker itself appears reasonably centered within its orange border, roughly 60/40 left-right and 55/45 top-bottom, which is acceptable for this issue. Surface condition is a significant concern — the C-3PO head area shows notable silvering/peeling or gloss loss across a broad patch of the face/forehead, which is a meaningful surface defect that PSA would penalize heavily. Corners on the backer card show light rounding consistent with a VG-EX range card. Edges appear intact without obvious nicks. The sticker peel/surface deterioration is the grade-limiting factor here, likely capping this at a 4 (VG-EX) at best, with 3 (VG) a real possibility depending on how severely PSA views the surface silvering; a 5 is possible only if the silvering is a photo artifact, which seems unlikely given its extent.

Centering on the die-cut sticker: the orange border appears wider on the left (~60%) versus right (~40%) and the top border looks slightly heavier than the bottom, roughly 55/45 top-to-bottom — centering is serviceable but not tight. The upper-right corner of the backing card shows visible creasing or stress wear, and the lower-left corner of the backing card appears slightly bent; the die-cut sticker itself shows edge fraying or minor chipping along the upper-left die-cut edge. Surface gloss appears reduced with some light handling marks visible across C-3PO's face, and the card back/peel layer shows slight waviness suggesting possible moisture or storage stress. The photo angle and resolution prevent confident corner or edge assessment; the range reflects meaningful uncertainty about crease depth and whether the sticker has been peeled or is intact on its backing.